Question about Canon Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Had the same problem with mine. Shook it upside down and cleaned it with air cans after reading this solution for other canon printers:
To my surprise, it worked perfectly... and was great stress relief.
Posted on Oct 22, 2009
just recently had these problems
LED flashing E3 code and alarm light was solid. But dissapeared when opened the coved and came back on when closed the cover.
Also the when the cover was open the inks did not slide out to the left and stayed to the right side.
There was no paper jam, but error said paper jam.
1. I took a thick piece of paper, from like a paper folder ones, thick enough to go in the printer and not curl up when pushed..
2. turned off the printer and turned it back on.
3, while printer was turning on,and makings sound as it does normally when turning on, I pushed through the piece of paper and the rotors stoped for a millisecond.
4.the rotors started again and pushed out the paper by it self with out my force.
5. I let the printer get started. and then turned it off and then on.
6. this solved all of my problems.
this was the first problem ever with this printer in 3 years.,preety good printer.
Posted on Nov 04, 2009
This particular error has a lot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip.You can find the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you lubricate the sliders with some white grease (don't get it on the small wipers or the black caps) the mechanism can now slide more freely, and the unit can park the head properly without giving you the dreaded head homing error 5100 (or E-2-2 on the LCD display). Keep in mind that this repair will probably require you to remove the right panel off of the printer to gain access to the purge mechanism. There are two screws behind the printer, and two in front for each corresponding side panel (the front screws are behind the grey front panel of the printer - open the top cover to see the clips which hold the front cover on).
Thank you !!
Posted on Jul 22, 2010
Tips for a great answer:
Nov 04, 2010 | Canon PIXMA MP470 All-in-One Printer
Feb 08, 2010 | Canon PIXMA MP780 All-In-One InkJet...
Nov 19, 2009 | Canon PIXMA MP510 All-In-One InkJet...
Oct 21, 2009 | Canon PIXMA iP1500 InkJet Photo Printer
Jun 29, 2009 | Canon PIXMA MP600 all-In-One InkJet...
Dec 24, 2008 | Canon PIXMA MP160 All-In-One Printer
Oct 25, 2008 | Canon PIXMA iP5300 InkJet Photo Printer
Aug 24, 2019 | Canon Office Equipment & Supplies
27 people viewed this question
Usually answered in minutes!