Question about Sony Televison & Video
Inserted new batteries, remote worked at that time. After playing one disc renote was no longer working.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Try the command code switch. I recently had a similar problem when my remote suddenly stopped working. It worked fine one time but nothing the next time I tried it.
I checked the emitter with a digital camera and found it was not working. I did the remote reset (remove batteries and push all the buttons twice, reinsert batteries) and the emitter was now working. However, the remote would still not control the base unit. I did the remote base code reset (push power, volume and TV/DVD buttons together) but this did not help. I then checked the command code switch. This is a small three position slide switch located in the battery compartment on the remote. I slid the switch back and forth several times returning to the default number one setting where it was before. I did not change anything on the base unit but the remote now worked.
Hope this helps.
Posted on Dec 26, 2008
If you have a cable box (otherwise known as a set-top-box) that you have to turn on when you turn the tv on, and you use to change your cable channels, the LG remote will not control it. The LG remote is strictly for the tuner built into the television, and is not capable of controlling the cable box.
You probably see "function not available" because you are viewing the picture on an external input of the tv (component, composite, etc). Your tv cannot tune stations in when it is set to an external input that you use to watch DVD's, cable boxes, games, and other devices. The tv is telling you that you can't change channels if it is on an input.
I hope this helps you...
Posted on Jan 20, 2009
There are 2 set's of command switch's for the dvd player, a 3 position command switch on the back side of the dvd player and another 3 position command switch on the inside of the remote right next to the batteries, easiest option is to remove batteries from remote and test each one of the 3 position switch's labeled 1,2 & 3 and test remote control.
Posted on Dec 24, 2010
SOURCE: My RM-YD028 Sony BRAVIA Remote
Remove the batteries from the remote and wait 5 minutes or more. After waiting, insert the batteries again. The remote should now work. If it's still not working, the remote is probably defective. If that is the case, please contact Sony Customer Support, which will be able to assist you in getting a replacement issued.
Posted on Jun 01, 2011
Tips for a great answer:
Jan 19, 2011 | Sony BDP-S300 Blu-Ray Disc Player
Jan 02, 2011 | Sony BDP-S300 Blu-Ray Disc Player
May 07, 2009 | Sony RM-EZ2 Remote Control
Mar 19, 2009 | Sony (RM-SS880) Remote Control
Dec 23, 2008 | Sony RM-ASP001 Remote Control
Jul 13, 2008 | Sony RM-V401 Remote Control
Sep 21, 2007 | Sony DVP-NS55PS DVD Player
Aug 19, 2019 | Sony Televison & Video
18 people viewed this question
Usually answered in minutes!