Question about Medical

Open Question

Ecg100g machine not powering on

I have had machine plugged in for a few days, the power switch and lights are on. the screen is not coming on, I can't do any EKG's because my screen is not on.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Buffalo12980
  • 625 Answers

SOURCE: Machine not heating. Power problems

check inside for burnt spade connectors or wires burnt off the connectors. spade connectors can be gotten from radio shack or electrical supply houses or home depot.

Posted on Sep 11, 2007

Ad
Mark_Webber
  • 472 Answers

SOURCE: acer al1715

Failing capacitors in the power supply will cause this problem and it's fairly common accross all brands.

The parts are cheap, but the labour costs can be high.

If you cannot do this procedure yourself, and also understand the dangers of the electronics, then call several TV repair shops in your area to get a quote, you maybe surprised how much the price can vary.

Just advise them you need to have the capacitors on the power board replaced. It will help them give you a more accurate quote.

Posted on May 27, 2008

  • 2 Answers

SOURCE: only power light will power on for few seconds then flashes.

Does the main lamp light at all? It sounds light a cooling fan failure. If the fan iis not working the the main lamp will not turn on and the power light will flash.

Posted on Jan 08, 2009

welcomejee
  • 10594 Answers

SOURCE: sony kdf50e 2000- green power light turns red what to do

Does red light blink? if yes, please count blinks as there would be pause of 3 seconds between blinks and let me know to help you out.

Posted on Feb 12, 2009

  • 1 Answer

SOURCE: screen stays black green light comes on for a few seconds.

This sounds like you have "bricked" your psp... there are a few things that can cause this: first would be that you have bricked it trying to install Custom Firmware, another would be that the battery died or it was shut off during an update. You can buy what is called a Pandora Battery and a "magic" memory stick which will reset your PSPs firmware to the original 1.5, or if you still have warranty you can send it in to Sony to get fixed. Pandora batteries and Magic Memory Sticks are sold in a package for about $10-15 on the internet. Good Luck, hope you fix it.
Please Rate, thanks!

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the machine light up?


Could be controller failure, especially if it has been erratic in the past.

Dec 15, 2017 | Washing Machines

2 Answers

I purchased a refurbished GE MAC 1200 EKG machine with a new battery. The first time we used it, it worked perfectly. The second time we used it however, only the standby light comes on. The screen remains...


There's several things that could be wrong. What I would do would be to try to run it off the battery, and if it works, then there is a problem either with your power cord, the power cord connection, or the power module inside the machine itself. Try completely turning off the system. Unplug it, figure out a way to let the battery be disconnected, turned off, or just simply let it die. Then re-boot the device and see if there's a change in operability. If there is, or isn't, you should consult the owners manual, and see what you can find on the issues your having. If all else fails, have a technician stop by and work on it.

Nov 25, 2014 | Medical

1 Answer

The screen goes black in the middle of recording an EKG


This particular device will not run on AC. Many medical devices are plugged into AC only to charge the battery. Make sure the green power LED light on back panel is working. If the battery is week and needs replaced, this can happen. Make sure the keyboard is plugged in properly also the power cord in the back of the machine can become disconnected and will not charge the battery. Have a technician verify that the display and backlight cables are securely connected but this will require the removal of the top cover, power supply and power supply boards. Display cable improperly connected. The cable is not fully
inserted into the jack and the right tab is not fully engaged to
lock in the cable.
After a crash, insert a USB flash drive and select Setup '
Service Functions ' Copy crash dump to USB
. A text file is created that can be displayed for analysis.
Hope that helps.

Oct 08, 2017 | BURDICK Atria 6100 EKG

1 Answer

My mac 8 ekg screen will not come on


That is a common problem and you need a component level repair of display board. This repair is not so expensive. Just send me email at medex@usa.com

Jun 27, 2012 | Medical

1 Answer

How do I turn on my Pro form 760 ekg .


Dear Sir.
Please turn on the power switch that goes down in the machine is Red switch, most of time there some light of Neon that illuminated when you push to ON. Otherwise reset the button to the side to the power button.

If everything is o.k go inside of the machine and see if the breaker of fuse is tripped or blow, or corrored ( clean but disconnect the power cord): and try again. If not work. You must see if you have power from the outlet wall in your house and reset your breaker.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Mar 06, 2012 | Proform Treadmill with iFit Live

1 Answer

My Phillips Trim III EKG is not printing says battery not charged, took battery out of unit and just ran it on AC power still says the same thing what should I do. Battery charged all night?


Hi,
You have to replace the battery. Normally the EKG and ECG works in battery even the mains is connected. If you check the battery it will show the specified voltage written on it. But when the machine start this voltage will drop. At this time the machine will show low battery and then switch off. when the battery is damage if you charge it for a few day then also it will not get charge. Replace the battery will solve the problem.
ok

Aug 03, 2011 | Philips Medical

1 Answer

Not coming ON


You need a new battery. You can get one form R&D Battries.

Apr 14, 2009 | Schiller Welch Allyn Cardiovit At 2...

2 Answers

The window on our schiller AT 2 plus ekg machine is too dark


When you first turn on the machine, hit the up or down arrows to adjust the brightness of the LCD screen.

Dec 09, 2008 | Schiller Welch Allyn Cardiovit At 2...

2 Answers

Schiller Welch Allyn Cardiovit At 2


Hello LV792727, Disconnect the AC & battery power and proceed with caution. Open the case to aquire access to the thermal print head. Clean the print head with a white eraser, the type used for cleaning ink prints not the #2 pencile eraser. Test the printing function. If necessariy use a Q-Tip with a light touch of Aceatone to whip the print head. The next step is replacing the printing element. Please inform me of the results. Good luck.

Oct 22, 2008 | Schiller Welch Allyn Cardiovit At 2...

Not finding what you are looking for?
Medical Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medical Experts

Gene Pitts

Level 2 Expert

159 Answers

Argospete
Argospete

Level 3 Expert

1035 Answers

ykanter

Level 1 Expert

15 Answers

Are you a Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...