Question about Televison & Video

Open Question

Cut cords tv antennae - Televison & Video

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm trying to "cut the cord" and use digital air TV. The problem is it buffers and stutters so badly I can't watch it. What can I do?


Get the correct antenna on your chimney. You need the right band antenna for your region. If your shonky antenna picks up something then you know a decent antenna high up will work fine. The attic is a better location but it has to get through the roof tiles and that maybe too much.

Oct 21, 2017 | Televison & Video

1 Answer

TV will not pick up the antenna


the input have to be set to the proper setting for an antenna to get reception .

May 11, 2016 | LG 50PG20 50 in. Plasma HDTV

1 Answer

I HAVE A VS-60705 LIVE IN THE WOODS.WPB WHAT IS THE BEST ANTENNAE TO USE FOR FREE DIGITAL BROADCAST.


If you live far from any digital broadcasting stations, you may not be able to pick up signals using an antenna. In my area, it is impossible to receive digital signals from transmitters located just across the river!

Sep 22, 2014 | Televison & Video

1 Answer

What do I need to correctly connect/setup my VEON 39" SR09110-B. I have plugged the power cord in and the antenna cord into the rv port on the back of the TV but the TV has no signal. Do I need to do


Your unit may need to know that it must read the antenna signals that are coming from the antenna. The unit might have a set-up feature in the TV's settings function for choosing either a cable (digital) or antenna (analog) signal.

Sep 19, 2014 | Televison & Video

1 Answer

Correct cords


Does your TV have connections (RCA plugs) on the back somewhere? If not, you need an antenna connection from the screw-on connection on the back of the VHS unit to an adapter to your VHF antenna screws on the TV unless your TV is new enough to have a screw-on type cable for the antenna connection. The tape player will broadcast a signal right into your TV over channel 3or 4! Check a TV sales department or Radio Shack for the parts.

Nov 25, 2013 | Zenith VRC420 VCR

1 Answer

My cord on my rca tv pronge broke off can i fix it


Would not be difficult I assume you mean antenna plug? Radio Shack would have the fitting but you would likely have to pull the back cover off to cut and replace would need soldering.

Jan 10, 2013 | Televison & Video

1 Answer

We can get analogue tv and foxtel chanels but we have lost all digital tv chanels. We have run a full scan but nothing happens


unplug the power cord plug from the tv then unplug the antenna cable look inside the antenna metal peace make sure the wires are not touching to each other first connect back the antenna plug then the power cord if its an interior antenna your problem is the antenna

Oct 17, 2010 | Sony BRAVIA KDL52XBR2 Television

2 Answers

Im not getting any signal weak or strong! What am I doing wrong?


What's your source for signal? You need an antenna to be the capture source for your signal that has a wire going from the antenna to the INPUT of the box. That's usually coaxial input. The box is the middle component between your TV and antenna.

Apr 26, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

2 Answers

Vcr won't record tv


You have to plug the antenna to the VCR, in the "Antenna IN" plug, from there it goes to the "TV OUT".

You use the VCR to tune the TV and choose record according to your VCR model.
Hope That Helps!

Jan 26, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

5965 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...