Question about Casio MS-80TV Scientific Calculator

1 Answer

MS-80TV AUTOMATICALLY ROUNDS UP TO 1 DECIMAL DIGIT

When the answer should be 1.34, it automatically rounds up to single decimal digit and shows 1.4. How do I make it stop rounding up?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

The [MODE] key can be used to select the modes described below.
Important! The following is a general explanation of Scientific Calculator modes. Note that your calculator may not include all of the modes described here.
1) Calculation Modes
Before performing a calculation, you first need to select the appropriate calculation mode.
COMP: Basic arithmetric calculations
(arithmetic operations, trigonometric functions, etc.)
COMPLEX: Complex number calculations
SD: Single-variable statistical calculations
(sample standard deviation, etc.)
LR or REG: Paired-variable statistical calculations
(linear regression statistical calculations, etc.)
BASE or BASE-n: Binary, octal, decimal, hexadecimal number system calculations
MAT: Matrix calculations (determinants, etc.)
VCT: Vector calculations
EQU: nth degree equations, simultaneous equations
2) Display Settings
Use these settings to control how calculation results are displayed.
Note that changing the Fix and Sci settings does not affect internal calculation results.
Norm: Exponential display format and cancels the currently configured Fix and Sci settings.
Fix: Specifies a fixed number of digits to the right of the decimal place.
Sci: Specifies a fixed number of significant digits.
3) Angle Unit Setting
(90°=?/2 radians=100 grads)
Deg: Degrees
Rad: Radians
Gra: Grads
4) Engineering Mode
Use this mode when you want to input and perform calculations using engineering symbols.

Please rate this response . .

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is 10.97 rounded up 2 decimal places


It is already a 2 decimal point digit.
10.97.
To round up it to a single decimal = 11.00

Mar 25, 2015 | Office Equipment & Supplies

1 Answer

How do I stop calculator from rounding up?


Hi Carol,

There are switches at the top just under the screen called the "Rounding Switch" and the "Decimal Point Selector Switch".

With the rounding switch you can select rounding up or down, but you may also want to use the second switch to show more digits after the decimal. Put it in the "F" position to show all decimal places. When it is in the 0, 1, 2 positions, it strips off and round the numbers.

Here is the link to the manual as well, look at the section detailing the "Decimal Point Selector Switch".

(You will need an Adobe Acrobat Reader to look at the manual.)

Hope this will help you. http://downloads.canon.com/cpr/software/calculator/P23-DHV-(USA-HWB).pdf

Nov 15, 2014 | Canon P23-DHV Calculator

1 Answer

How do you round 5,403.264 to the nearest hundred


Assuming you do mean to the nearest hundred, answer the question 'is this number closer to 5400 or 5500?' It is closer to 5400 (The first digit to the left of the decimal point is 'ones', the second place is 'tens', the third place is 'hundreds', so you look at the third digit to the left to round to the nearest hundred)
If, in fact, you meant hundredth, answer the question 'is it closer to 5403.26 or 5403.27?' It is closer to 5403.26 (The first digit to the right of the decimal point is 'tenths', the second digit is 'hundredths', so you look at the second digit to the right to round to the nearest hundredth)

Sep 17, 2014 | The Learning Company Achieve! Math &...

2 Answers

HOW DO I SET THE DECIMAL ON SHARP EL-1197PIII?


Up Arrow: Answer is rounded up
5/4 key: Answer is rounded off
Down arrow: Answer is rounded down
The decimal will float if the calculation is multiplication or division
If the decimal selector is set to F then the answer is always rounded down

Aug 26, 2014 | Sharp EL-1197PIII Calculator 12-Digit...

1 Answer

Decimal answers


There are no decimal digits in this number. You can put a decimal mark in 8 537 000. and append two zeros, or more. But I would not call that rounding 8 537 000.00

Feb 20, 2014 | Office Equipment & Supplies

1 Answer

How to stop the caculator from rounding off decimals. |t doesn't give any accurate answers. e.. 0.789 will become 1


Two choices: Press the MODE key a number of times until you get to the "Fix Sci Norm" screen, press 3 to select "Norm" and then press 1 or 2 to select one of the norm modes.

Press the MODE key a number of times until you get to the "Fix Sci Norm" screen, press 1 to select "Fix" and then press a digit specifying the number of digits you want after the decimal point.

If you need a manual you may download a copy here. The display modes are discussed on page E-15.

Dec 23, 2012 | Casio FX82MS Scientific Calculator

1 Answer

How do I stop my ti 34 ii calculator from automatically rounding numbers in scientific notation?


First, bear in mind that the calculator is going to round numbers eventually, as it can only show a finite number of digits.
You have some control over where and how this rounding takes place. Press [mode], down-arrow, down-arrow, then right-arrow to the choice of decimals desired. Press [enter] to select it.

Feb 24, 2012 | Texas Instruments Office Equipment &...

1 Answer

I have a Casio MS-8TV calculator and want to change the VAT rate to 20% (usage in UK), please. Val


How do I program tax rate into my calculator?
Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]


Printing models (except HR-8TE):

1. Have calculator in "print" mode
2. Press [CA]
3. Hold [SET/%] key for about 3 seconds
4. Input the tax rate
5. Press [TAX+]
6. Press [SET/%]
^Top I am having a problem registering the ClassPad 300, it keeps telling me my product key is wrong.
Enter only the numerals, not the letters.
^Top What features do our calculators have?
The attached chart shows comparisons of the different calculator models. This includes graphing, scientific and printing calculators. download the chart here
^Top What is the [F CUT 5/4] switch or [DEC] F, 0, 2 button for?
The HR-8TE/HR-8TM have a [DEC] key with F, 0, 2, and 5/4 over it, while many other calculators models have a switch labeled [F CUT 5/4].
The button or switch can control rounding off to a certain number of decimal places. F is floating point (no F indicator on screen), 0 rounds off to 0 places after decimal point, and 2 rounds off to 2 places after decimal point.
The 5/4 applies to either the 0 or 2 modes, and describes the type of rounding off that is performed. The calculator will round down if the digit after the one you are rounding to is 4 or lower, and round up if the digit is 5 or higher.
^Top What is the [5,4,3,2,1,0 ADD (2)] switch used for?
This switch is used to determine how many decimal places your answer is displayed in.
ADD (2) is often used for monetary calculations, so that it is not necessary to enter the decimal point. It is automatically placed two decimal places from the end for cents. For example, entering 123 will display as 1.23.
^Top Why do I get 111.1111... when I calculate 100+10%?
This is a markup on price procedure. The formula is as follows:
Markup%=(Markup Price-Cost)/(Markup Price)
^Top Why do I get the wrong answer when doing a percent calculation?
Make sure that you are following the correct procedure.
Adding 10%: 200 [×] 10 [%] [+]
Subtract 10%: 200 [×] 10 [%] [-]
^Top What tests are calculators permitted for?
AP Calculus requires a graphing calculator.
Any graphing or scientific calculator is permitted on the following as long as it does not have a QWERTY keyboard, electronic writing pad or a pen-input/stylus-driven interface:
PSAT/NMSQT, SAT I
SAT II Math, IC & IIC
AP Statistics (graphing expected)
AP Chemistry
AP Physics

May 27, 2011 | Casio Parts Cash Register PC Desktop

1 Answer

My ti 30 calculator always rounds to the nearest number with the answer. How can i get this to stop????


Hi,
To stop the calcultor rounding your answers to the nearest INTEGER, press [2nd][FIX] followed by a number other than 0. For exemple
[2nd][FIX] 3 will display the numbers with 3 decimal digits.

Hope it helps.
Thank you for using FixYa.

Nov 24, 2009 | Texas Instruments TI-30XA Calculator

1 Answer

Rounding off in Casio FC 200V


Hello,
Press [SETUP] select FIX then press [EXE]. Enter the number of decimal digits you want (3 or 4). Press [ESC] then press [EXE]
Hope it helps.

Dec 14, 2008 | Casio FC-200V Scientific Calculator

Not finding what you are looking for?
Casio MS-80TV Scientific Calculator Logo

755 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...