Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

2 Answers

Agitator not working

Whirlpool washer model LSQ9544KQO Agotatgor Jumps and Makes some noise Is Not Moving The Clothes Aroundjnchoate@

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

If the entire agitator is slipping, you probably have a loose agitator bolt that requires tightening. If its only the auger (upper portion of the agitator), you have worn agitator dogs that need to be replaced. The following link explains how to replace the dogs:

http://www.fixya.com/support/r823955-replacing_agitator_dogs

The part number for the agitator dogs is included in the link provided, along with how to locate and tighten the agitator bolt if it was found to be loose. Do not overtighten the bolt as this can cause damage to the agitator and/or restrict its movement. Tighten until snug.

The dogs can be purchased at pcappliancerepair.com for about $5. For just a bit more you can use part number 285809 and purchase the entire cam replacement kit which includes the cam, the bearing and the dogs for about $8.

If you have questions about this repair, or need additional assistance, please let me know. I hope this helps you.

Posted on Sep 13, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, This agitator is a 2 piece agitator. Can you see if the lower half on the agitator is working properly? If the lower part is working and the top is not, you will need to change the agitator dogs. If neither half are working, you might be having transmission issues.
To change the dog kit, re,ove the top cap on the agitator and locate a 7/16" bolt. Remove the bolt and the agitator will lift out. Pull the agitator apart and the dogs are 4 small plastic pieces inside the top half of the agitator.
Please let me know if this helps you or if I can assist you further.

Thanks
Vic

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clothes getting twisted around agitator


That does not sound good. New dogs sound great, but you must get to the bottom of why the clothes are becoming twisted on the agitator. Usually not enough WATER. Think loose flow of clothes submerged.
Long story short, you cannot jam pack this machine. Less clothes, more water, will equal long life.
Be sure that the mating teeth for the dogs, is not damaged. Slipping here would make loud noise.
More water, less clothes.

Apr 04, 2018 | Kenmore Washing Machines

1 Answer

Clothes & sheets get wrapped in agitator and it makes a loud noise in my Whirlpool wtw4800xq1


Here is a video on how to change a part that could be part of the problem, the video shows how to remove the agitator so that you can remove the clothing that is jamming the machine, http://www.repairclinic.com/PartDetail/Whirlpool-Washing-Machine-Agitator-Repair-Kit/285809/470910?modelNumber=WTW4800XQ1&ss=a11b5d956381&mr=1

Jul 30, 2016 | Whirlpool Washing Machines

2 Answers

Ultimate Care II, Lsq9544kqo. Why does it tie clothes in knots?


some things need to be in a laundry sack when washed . one of those mesh net type bags

Oct 01, 2015 | Whirlpool Washing Machines

1 Answer

At the end of the spin cycle, my Kenmore Washing Machine makes a grinding noise like an out of balance brake drum. What could be the problem


If your washer model number starts with 110. it's a whirlpool washer. Whirlpool use a spin tube with two notches in it. There is a block assembly that holds the inner basket down on to the spin tube. This can be accessed by removing the top of the agitator and take out the 7/16 screw. Lift the agitator to expose the top of the spin tube. The tube is stripped on top where the basket sits. When the washer stops spinning, the inner basket keeps moving. That is the noise you hear. Replace the spin tube and possibly the block.

Oct 03, 2009 | Washing Machines

1 Answer

Top load whirlpool washer model LSQ9544KQO leaking small amount


more likely from a hose........need lid off and a good torch

cheers

Aug 03, 2017 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Noise when stopping after spin cycle or open lid (after moving)


check hub nut, it is likely loose, its under the agitator. top pops off agitator and bolt hold agitator down.

Jan 04, 2009 | Whirlpool Inglis IP4400 Washer

1 Answer

Load squeal when it in the agitation cycle.


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. 
for detailed help with diagrams and step by step instructions click the link http://www.applianceaid.com/washerspinnoise.html

Dec 29, 2008 | Admiral AW22 Top Load Washer

1 Answer

Kenmore 80 series agitator problem


time to look for a new washer, this is a gearcase problem, or cluth. Not easy to fix , unless know how.

Nov 08, 2008 | Washing Machines

1 Answer

Won't spin or agitate, makes grinding nois only.


Pick up a copy of the Nov."The family Handyman" magazine. Pg. 60 shows your problem and how to repair it. Most likely it's a broken coupling,

Oct 29, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...