Question about Sharp Televison & Video

Open Question

Unable to scan for digital signals. Sharp Aquos 46. I have had local signal for years but now I am unable to scan.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
satavlad
  • 405 Answers

SOURCE: Is there a headphone jack on the sharp aquos 46?

There is no headphone jack on this TV

Posted on Dec 05, 2009

Ad
micromend
  • 748 Answers

SOURCE: digital signal for my Sharp Aquos

Hi
On the TV menu did you change it from Cable to ANT?

Posted on Mar 13, 2010

  • 37 Answers

SOURCE: We have a new 46" Sharp Aquos with a "snowy"

sounds like you have a cable connection problem make sure your tv is set to dtv signal in the menu screen. when you scan the channels should be displayed as 12.1 or 8.2 not just a single number if the digital channels are programmed correctly then change the cable coming into the tv from antenna making sure that it isnot crossing any power wires good luck and hope that i helped

Posted on Nov 09, 2010

  • 1 Answer

SOURCE: Sharp Aquos 46" HDMI problem

I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Posted on Apr 25, 2011

  • 406 Answers

SOURCE: Am getting an incompatible video signal message when trying to tune in new TV digital channels on a sharp aquos tv

You will need to switch frequency. Check your manual on how to do this.

Posted on Mar 13, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

52inch Sharp Aquos has a constant blue blinking power on light no picture at all.Tried the resets,still the same,installed new inverter boards,still the same.Now what?


This problems is not those 2 long LCD inverter boards problems,why did u replaced those 2 long LCD inverter boards?I fix this problems before for a 46" LCD Sharp Aquos L46D55U tv.This problems,it the Tuner signal board is dead.That the board,where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

Nov 08, 2010 | Sharp LC52D65U 52 in. LCD TV

1 Answer

We have a new 46" Sharp Aquos with a "snowy"


sounds like you have a cable connection problem make sure your tv is set to dtv signal in the menu screen. when you scan the channels should be displayed as 12.1 or 8.2 not just a single number if the digital channels are programmed correctly then change the cable coming into the tv from antenna making sure that it isnot crossing any power wires good luck and hope that i helped

Nov 07, 2010 | Sharp AQUOS 52" Flat-Panel LCD HDTV

1 Answer

Aquos model LC46D64U...approx 2 years old..Won't power up and get the power light flashing 3 times then the OPC light once..which is repeated...Any ideas...I believe this is quite common with Sharp TV's


I have a Sharp LCD 46 in.tv do this often.Yes,it is.This problems,the tv Tuner signal board have problem,but the tv is still useable.The POWER and OPC light indications flashes.Just push the power switch again,wait see tv turn,not POWER and OPC flashes again,push the power switch agian and wait.Have to do this like 3 or 4 times sometimes,than the tv backlight will come on,tv will work.Don't know but,if u require to pushing power button more 10 or 12 times,the tv Tuner signal board don't take an turn on the tv backlight get the tv to work.The Tuner signal board is dead,time to replaced the tv Tuner signal board.

Oct 18, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Brand New TV - remote doesnt work


Is it the original remote for this TV?
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

Jul 03, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

Digital signal for my Sharp Aquos


Hi
On the TV menu did you change it from Cable to ANT?

Mar 13, 2010 | Televison & Video

1 Answer

Have a sharp aquos TV. Cannot get the volume very


If you have the tv signal coming from the cable box, then check the settings for your cable box. if not check your owners manual.

Feb 08, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Sharp Aquos 46" HDMI problem


I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Jun 16, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Want to change my sharp hd tv from 480i to 1080p


You Can Not Change. The TV Recognize the signal on the INPUT.
If the signal is 480i than the tv shows 480i
If the signal is 1080p than the tv shows 1080p (if supported)
If you try with your areal antenna (for now digital broadcast is maximum 1080i (in USA) The TV itself doesnt "upconvert" lower resolution signals.

Dec 18, 2008 | Sharp AQUOS 52" Flat-Panel LCD HDTV

1 Answer

Sharp Aquos Audio Intermittent


This is a problem with the ATSC channel's reception. Usually switching to another channel and back solves the problem.

Jul 28, 2008 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

Sharp Aquos 46 In TV Problems:


Sharp list no issues or service tips for this model but I am sure most freeze ups are and issue of weak cable signals or defective cable receivers. If this has truly been elimnated the main digital pcb in the TV could be issue or more likely the TV may need the latest software upgrade. This is most likely only able to be facilitated by a Sharp auth. service center.

Dec 11, 2007 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

Not finding what you are looking for?

Open Questions:

0 Answers

I have a Sharp LC40LE511E. There is some sort of fault and I don't know what it is? Blinking LED lights, no picture. So, when plugged in, the power LED is red as it should be on standby. Press on button either on the TV or on the remote, and it flashes green as if it is about to come on, then it flashes back to red, and then blinks between green and red until unplugged. I have shined lights up close, but the pixels seem completely off so I don't think it's the backlights. It could be the backlights if the TV somehow knows and is preventing them from turning on, but it just doesn't feel like that's the problem. All the capacitors are fine, and in fact, all the boards and components look in quite good condition. As it is flashing green and red, I figured it could be a reset issue. The previous owner had no remote so perhaps they kept over pressing certain buttons on the TV it's self, causing some sort of crash. So, I have tried the old unplug, volume down and channel up, plug in, turn on etc. Nothing happened. Not sure if that was the right way round for this model but it seems to be the standard reset for all of them. Yes there are slightly different variations, but that is the only one I have tried, both with the onboard buttons, and the new remote buttons. The remote is legit and seems to work perfectly fine. Tried asking the justanswer.com people, and never got a direct response re: the actual fault code that blinking red then green, means. If anyone could at least tell me that, I could be on my way to figuring out what is actually wrong with it, or how to reset it. As the pixels seem to be completely off, it may be a power board failure, but then, why would it be teasing me with flashing green? I am perplexed. Any ideas would be much appreciated thanks. It's 109 pound for a new one, so it's really not worth getting anyone to take a look.

Sep 17, 2019 | Sharp Televison & Video

Televison & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...