Question about Televison & Video

Open Question

Robot coupe rc2b. Suddenly, there are no lights at all. When I plug it in, the green and red light usually come on--now nothing at all.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Blinking lights on KitchenAid blender

Alternating blinking lights on a Kitchenaid blender indicate a bad circuit board which is unable to run the motor properly. Unplug the blender, take the jar off, and turn the spindle by hand. Then plug it back in. If it does not work properly, try a different outlet (perhaps not in the kitchen). If nothing works, the blender needs to be repaired.

Posted on Nov 09, 2007

Ad

SOURCE: 8525 Red Light

Take the battery out then plug in the phone. The light should turn red, then reinsert the battery with it still plugged in. It should turn orange and start charging.

Posted on Jun 27, 2008

YourTech
  • 63 Answers

SOURCE: Internet Light Stays Red on WAG54GS Wireless Router

If your router's internet light is red it means to say that there's no connection. You really have to call Tesco.

Posted on Aug 21, 2008

  • 1 Answer

SOURCE: flashing red light

I think this sounds like my problem (need to replace the projector lamp). However, when I hit the "on" button, my SXRD 50" blinks green for about a minute then starts blinking red. Can you confirm the bulb solution? I was very pleased with this sight when my fan malfunctioned. I got the fan in a matter of day's from Sony and it fixed that problem.

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: when i turn the tv on the light turns red rather than green when lite and the screen stays blank.

There is no power coming from the step down transformer

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Robot coupe food processor RC2800 SN: R2579592 120v 6amp has no power at all, and power supply is good


You will need to find a "small appliance repair shop" in your area, most likely the main PCB has failed, it controls the motor. Check the yellow pages.

Aug 19, 2016 | Robot Coupe Food Processors

1 Answer

Why won't my Roomba start when I press a green "clean" button?


Bad PC board. Throw it away. Robot vacs are nothing more than novelties ( expensive toys ) They may do what you want them to do at first but they never last very long and other than brush replacements they are not repairable. If it is within the warranty period you can get a replacement with that.

Jul 01, 2017 | Roomba iRobot 630 Vacuum Cleaning Robot

1 Answer

Roomba 4220 light says charged but wont turn on


Try resetting

to reset the charging system. You can do this by removing the battery from the robot and unplugging the charger from the wall and robot. Please hold the power button down for 30 seconds. You then should charge the robot....."

Dec 29, 2012 | Vacuums

1 Answer

Hi, When I push the start button on my prowler 720 control box, it automaticlly goes from green to red. When disconnect the prowler from its control box it stays green. Is there something on the prowler...


The power cord pins are numbered, 1 through 4. So are the transformer plug holes (the female pin holes in the "power pack"). For example, if you don't match number 1 to number 1, the green power light on the transformer will light for about 5 or 10 seconds, but the robot will sit there... well, like a powerless robot. Match the pin hole numbers and you have a working robot!

Apr 22, 2011 | Pentair Prowler 720 Pool Cleaner

1 Answer

Old or New battery not charging...or so it seems (Discovery 4XXX)


the charger is not charging its not putting any thing out into the batterys the charger clock is working but your not getting any charge from it

Mar 21, 2010 | iRobot Roomba 4210 Bagless Robotic Vacuum

1 Answer

Light flashes but won't turn on


The Roomba's internal charging system is not working. In this situation, a replacement Roomba is necessary. You can call 1-877-855-8593 to find out what your options are. There's a discount for Roomba owners who need replacement units.

Jul 22, 2009 | iRobot Roomba 560 Robotic Vacuum

1 Answer

Printer suddenly stuck while starting up


eww this one can be lots of things!!!

make sure no paper jammed anywhere

make sure the print head is moving

make sure the ink cartridge is set down right


May 24, 2009 | Samsung CLP-300N Laser Printer

1 Answer

2Wire 473 router problem


Take the modem and plug it into a GFCI outlet. You can find one in the bathroom or the kitchen.

If the power light comes on solid green and the dsl comes on red then the modem is good. Was it plugged into a power strip by the computer? If so, plug it straight into a wall outlet.

If the power light comes on solid red then the modem has hardware failure. I would contact your ISP and have them replace it if it is still underwarranty.


Mar 23, 2009 | 2wire (1000-400108-001) Router

1 Answer

Roomba Schedular


Let it charge for a full 24, or even 48 hours, regardless of the green light. If it still dies you probably need a new battery.. or worse.

Aug 31, 2008 | Roomba Robotic Floor Bagless Vacuum

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...