Question about Washing Machines

Open Question

L5 ERROR - TREDMILL STARTS OK BUT AFTER A MINUTE AND A HALF IT STOPS WITH L5 APPEARING ON SCREEN. WHAT DOES THIS MEAN?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: tredmill error code

Moat likely a problem with the motor control board. See treadmilldoctor.com

Posted on Nov 17, 2008

Ad
  • 6 Answers

SOURCE: After approx. 30 min. of walking on full speed it

I had this happen on our machine after about 5 years of use. I just recalibrated it and it appears to be working fine now. See the manual for information on the steps needed to take in order to do this.

Posted on Jul 29, 2009

  • 31 Answers

SOURCE: after 10minutes the tredmill stops

The walk belt is either worn out causing too much friction on the deck which overheats the motor or there is a lack of lubricant between the walkbelt and deck. Do not use silicone or unapproved lubricants as they will deteriorate the walkbelt.

Posted on Jan 16, 2010

blueextc3221
  • 15935 Answers

SOURCE: KENMORE CALYPSO WASHING MACHINE

The control should flash this error code if it cannot detect the lid switch opening and closing properly.
This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch.

The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error E07 on Carl Lewis Treadmill


does any1 know how to fix the e07 error on the carl lewis tredmill or why is has appeared?

Feb 06, 2011 | Sport & Outdoor - Others

1 Answer

What is L5 mean


Hi dear.That should be LS Code instead of L5.Please check the followings.I hope that helps.Thanks.


LS
Lid Switch Error
The control should flash this error code if it cannot detect the lid switch opening and closing properly. This error code may also be used if there is a disagreement between the motor and machine controllers on the stat if the lid switch. The control should not allow the unit to run in this condition.

This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display.

Sep 02, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Error E5 or L5???


L5 means it cannot sense the lid open or closed.
Lid switch is likely bad.

This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch. The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open. Open the lid or press STOP/CANCEL to clear the display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Aug 23, 2010 | Maytag Neptune MDG5500AW Gas Dryer

2 Answers

The washer stops working and the light flashes L5


The control should flash this error code if it cannot detect the lid switch opening and closing properly.
This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch.

The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!

Jun 24, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Error code L5 on schwinn 820p


Landice L9 tredmill, L5 display on screen,belt runs slow and nothing else works to the touch.

May 13, 2010 | Schwinn 820 P Treadmill Silver Service...

2 Answers

I have a error reading of l5 or ls not too sure york fitness z16


Hi,

The L5 message means that there is a problem with the speed setting switches. Some models have one set of speed adjusting stitches on the handlebar and another set on the console. One of them is defective and is causing the problem.

Dec 29, 2009 | York Exercise & Fitness

1 Answer

After approx. 30 min. of walking on full speed it


I had this happen on our machine after about 5 years of use. I just recalibrated it and it appears to be working fine now. See the manual for information on the steps needed to take in order to do this.

Jul 11, 2009 | Bowflex Treadclimber

1 Answer

L5 code appears after it stops on the Z500 Treadmill


hi,
LS mean low speed error, Please check the sensor wire( if moor move). if not move please check control board.

Mar 30, 2009 | Spirit Fitness Z500 Treadmill

1 Answer

KENMORE CALYPSO WASHING MACHINE


The control should flash this error code if it cannot detect the lid switch opening and closing properly.
This error code may also be used if there is a disagreement between the motor and machine controllers on the state of the lid switch.

The control should not allow the unit to run in this condition. This code will also appear if the user presses the START key while the lid is open.

Open the lid or press STOP/CANCEL to clear the display

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 26, 2009 | Washing Machines

1 Answer

System error


Look for a reset function in camera manual If no manual download one - if nada, then contact Nikon customer service for inside assistance with dilemma. Due to high cost of camera repairs you just might have to go shopping.

Aug 26, 2017 | Nikon COOLPIX L5 Digital Camera

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...