Question about Casio Office Equipment & Supplies

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: how do i generate random numbers on the casio

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the **bold text** in square brackets indicates key presses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number
between 0 and 1. If you need to generate a number with a higher range,
then there may be extra steps involved. For example, to choose a random
number between 0 and 100, you would enter:**Ran#×100 or Ran#(100)**Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Posted on Jul 25, 2010

Ad

SOURCE: I have a casio fx9750GA plus and need to know how ...

The following uses keystrokes and screen captures from the FX-9750GII but the essential information is the same. Use the F6 key to move to next page of TABS (those at the bottom of screen) until you find the TAB that interests you (PROB, RAND#, INT, etc.)

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the **bold text** in square brackets indicates key presses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number
between 0 and 1. If you need to generate a number with a higher range,
then there may be extra steps involved. For example, to choose a random
number between 0 and 100, you would enter:**Ran#×100 or Ran#(100)**Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Posted on Jul 25, 2010

SOURCE: how do i generate random

Use the rand() function. If you give it a positive integer argument *n*, it will return a random integer in the range in the interval [1, *n*]. You'll find rand() in the MATH/PROBABILITY menu.

Posted on Dec 08, 2010

SOURCE: How do I generate a

The random number function always generates a number between zero and one. You can convert this to a random number in any range by a suitable combination of multiplications and additions. For example, if you want a random number between zero and ten, multiply the generated random number by 10. If you want a random number between one and ten, multiply the generated random number by 9 and then add 1.

If you want to simulate the roll of a six-sided die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a 1, 2, 3, 4, 5, or 6 with more-or-less equal probability.

Posted on Mar 10, 2011

SOURCE: how to generate random numbers

Use the random number function, RAN#

Manual:
http://support.casio.com/pdf/004/fx-82ES_83ES.etc_Eng.pdf

Posted on Mar 25, 2011

The RAN# button generates a random number between 0 and 1.If you want to flip a coin, see whether the generated random number is less than 0.5. Alternatively, multiply by 2 and see whether the integer portion is 0 or 1.If you want to flip a die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a number in the range 1 through 6. A similar method will allow you to generate random numbers in any range.

Apr 16, 2012 | Casio FX-55 Calculator

The random number function always generates a number between zero and one. You can convert this to a random number in any range by a suitable combination of multiplications and additions. For example, if you want a random number between zero and ten, multiply the generated random number by 10. If you want a random number between one and ten, multiply the generated random number by 9 and then add 1.

If you want to simulate the roll of a six-sided die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a 1, 2, 3, 4, 5, or 6 with more-or-less equal probability.

If you want to simulate the roll of a six-sided die, multiply the generated random number by 6, add 1, and ignore the fractional portion. This will give you a 1, 2, 3, 4, 5, or 6 with more-or-less equal probability.

Mar 10, 2011 | Casio FX-300MS Calculator

Actually, the answer is 79.

The fx-115ES does not have a key for the modulus operation. Nor does it have an integer-part or fractional-part operation. However, it is possible to calculate the remainder using integer arithmetic.

Press MODE 4 to shift into integer mode. Then type in 3 5 2 - 9 1 * ( 3 5 2 / 9 1 ) = and see the answer 79. It's a pain as both numbers have to be entered twice, but it does get the job done.

To get back to working with real numbers again, press MODE 1 ( or MODE 2 for complex).

The fx-115ES does not have a key for the modulus operation. Nor does it have an integer-part or fractional-part operation. However, it is possible to calculate the remainder using integer arithmetic.

Press MODE 4 to shift into integer mode. Then type in 3 5 2 - 9 1 * ( 3 5 2 / 9 1 ) = and see the answer 79. It's a pain as both numbers have to be entered twice, but it does get the job done.

To get back to working with real numbers again, press MODE 1 ( or MODE 2 for complex).

Feb 26, 2011 | Casio FX-115ES Scientific Calculator

Use the random number function, RAN#

Manual: http://support.casio.com/pdf/004/fx-82ES_83ES.etc_Eng.pdf

Manual: http://support.casio.com/pdf/004/fx-82ES_83ES.etc_Eng.pdf

Sep 14, 2010 | Office Equipment & Supplies

The post answer the question concerning how to generate random integers. The example given is for rolling a dice. I am inserting the modification that treats your case at the end.

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates keypresses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

To generate random number between 1 and 50

**Int(Ran#×50)+1**

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

To generate random number between 1 and 50

Jul 16, 2010 | Casio FX-115ES Scientific Calculator

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates key presses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Jul 06, 2010 | Casio CFX-9850G Plus Calculator

The following uses keystrokes and screen captures from the FX-9750GII but the essential information is the same. Use the F6 key to move to next page of TABS (those at the bottom of screen) until you find the TAB that interests you (PROB, RAND#, INT, etc.)

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates key presses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

The random number generator function is called Ran# and can be accessed in RUN mode by pressing:

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

May 21, 2010 | Casio CFX-9850G Plus Calculator

The random number generator function is called Ran# and can be accessed
in RUN mode by pressing:

**[OPTN] [F6] [F3] (PROB) [F4] to access the (Ran#)** function

In the paragraph above, the**bold text** in square brackets indicates keypresses,
while the text in parentheses represents the menus that appear at the
bottom of the calculator screen. This also assumes there are no menus on
the bottom of the screen when you begin. If PROB is already on the
screen, then the [F6] key is not necessary, just press [F3] then [F4] at
this point.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

Press**[OPTN] [F6] [F4] (NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

In the paragraph above, the

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

Press

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Mar 03, 2010 | Casio FX-9860G Graphic Calculator

Hello,

To access the Random number generator, press [MENU], Use arrows to select [RUN] and press [EXE].

In [RUN] press [OPTN][F6:->] to pan to the right then press [F3:PROB] then [F4:RAND#]. The command echoes on the screen.

Hope it helps.

To access the Random number generator, press [MENU], Use arrows to select [RUN] and press [EXE].

In [RUN] press [OPTN][F6:->] to pan to the right then press [F3:PROB] then [F4:RAND#]. The command echoes on the screen.

- Now if you press [EXE] a number between 0 and 1 is generated.
- Each time you press [EXE] a new number is generated.

Hope it helps.

Nov 07, 2009 | Casio FX-9750GPlus Calculator

A random number generator exists on this calculator. It is accessible in RUN or PGRM modes by pressing the OPTN key. If you don not see a tab PROB at the bottom of screen, press the rightmost key to move to next page.

Anyway, RAND# generates a real number between 0 and 1.

For other numbers read on.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

**Ran#×100 or Ran#(100)**

Let's
say you want to simulate a dice roll, where you get an integer between 1
and 6. Your first step would be to do:

**Ran#×6**

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

**Int(Ran#×6)**

**[OPTN].......(NUM) [F2] to access the (Int)**

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

**Int(Ran#×6)+1**

The result should be an integer between 1 and 6.

Anyway, RAND# generates a real number between 0 and 1.

For other numbers read on.

The Ran# function generates a random decimal number between 0 and 1. If you need to generate a number with a higher range, then there may be extra steps involved. For example, to choose a random number between 0 and 100, you would enter:

This will give you a random decimal number between 0 and 6. But we need an integer, not a decimal. To make it an integer, you would change this to:

This now gives you an integer between 0 and 5. We just need to add 1 to the result.

The result should be an integer between 1 and 6.

Nov 07, 2009 | Casio FX-7400G Plus Calculator

90 people viewed this question

Usually answered in minutes!

×