Question about Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There are no lint filters on this machine. The lint is pumped out with the water. There may be a restriction in the drain line starting where it connects to the tub or the small drain holes in the inner tub may be clogged.
Posted on Jan 12, 2008
SOURCE: washing machine dosnt spin dry,
remove the front panel and check for obstructions in the drain pump also on some models there is a catch screen in the tub to pump hose if you have a shop vac pull the water out of the drain hose first as there will be water in the unit
Posted on Jun 03, 2008
SOURCE: I have a defy top
Error E9 means a problem with your water pressure sensor. Check the sensor by pulling the hose attached to the
bottom part of the tub and blow on it and test the terminals of the
sensor if it will close or open.
Posted on May 10, 2011
5E. Water Drain Error.
5E is displayed if the water level frequency detected os 25KHz or less in the initial phase of the UNB - detecting cycle. The WATER DRAIN ERROR
can be rectified by turning the POWER SW OFF AND THEN BACK on.
Hope this helps you
Posted on Feb 01, 2012
Tips for a great answer:
Sep 12, 2018 | Washing Machines
Jan 31, 2018 | Washing Machines
Jun 25, 2016 | Washing Machines
Mar 02, 2015 | Washing Machines
Jul 19, 2014 | Washing Machines
Feb 24, 2013 | Washing Machines
Feb 01, 2012 | Samsung Washing Machines
Jan 23, 2011 | Washing Machines
Sep 20, 2010 | Whirlpool Washing Machines
Apr 06, 2010 | Washing Machines
Sep 19, 2019 | Whirlpool Washing Machines
21 people viewed this question
Usually answered in minutes!