Question about Washing Machines

Open Question

WD420 6kg Washer Dryer Aquarius door want open washer been off for over 10 minutes

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 213 Answers

SOURCE: Bendix washer-dryer door won't open

if you remove the panel in the front lower right hand coner of the washer you should be able to feel around in there for a plastic cord. pull the cord to manually unlock the door

Posted on Nov 25, 2007

Ad

SOURCE: CODE F13 ON HOTPOINT AQUARIUS WASHER/DRYER

its the safety thermostat on the top off the drying element

Posted on Mar 04, 2008

  • 1028 Answers

SOURCE: Dryer door pops open after

door strike is bad also door may be warped make sure door is not warped if it is just twist in opposite direction if strike needed part #279570

Posted on Jun 14, 2008

barkencoa
  • 3463 Answers

SOURCE: door wont open on my hotpoint aquarius washer/dryer

Turn the dryer dial to off, making sure you can hear it click off, wait 1 min, and then try door. If it will still not open then you may have faulty door lock, or a prob with the door handle.
Plz rate my solution.
Thanks.

Posted on Dec 29, 2008

  • 14 Answers

SOURCE: aquarius 1100 - door won't open

lift lid of top reach to front and pull the wire cable up to the door latch make sure u unplug machine first

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint Aquarius WD63 door won't open


on some hotpoint models you can remove the front kickplate and on there will be a yellow or green plastic pull toggle, pull this and it will bypass your door lock, if your appliance does not have this then you will need to unplug and leave unplugged for 10-15 mins to reset the door lock, you will however more than likely need a new door lock

Apr 07, 2014 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Door will not open door light just flashing on and off


washer not spining mini load button flashing on/of buton flashing

Apr 27, 2010 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint Aquarius waher dryer


possible blockage ' filter or could aslo be water coming back from the sink if drain hose too low , you may need to raise this....

Nov 13, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Aquarius 1100 - door won't open


lift lid of top reach to front and pull the wire cable up to the door latch make sure u unplug machine first

Sep 07, 2009 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

I have an Aquarius WD61 washer/dryer. The door will not now open.


No date on this that I can find. Can you move the dial to a different setting? If so, just move it a fraction to see if it will engage. If it does engage, then you will need a new timer, goes under the dial. If it is a computer panel, try resetting it on another load setting and put it on the final spin.

Godd luck

Aug 08, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Door wont open on my hotpoint aquarius washer/dryer


Turn the dryer dial to off, making sure you can hear it click off, wait 1 min, and then try door. If it will still not open then you may have faulty door lock, or a prob with the door handle.
Plz rate my solution.
Thanks.

Dec 29, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Door locked


Press 'end of cycle' button for over 3 seconds, & wait for a couple of minutes then try the door. Do not force door.

Mar 27, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hi hotpoint wm62 door locked


Try "end of cycle" button & wait for 2 minutes before you try the door..........

Jan 12, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint Aquarius 1100 - Grinding Noise From Drum


This sounds like the min bearings have gone, open the door and see if there is any play up and down on the drum. if so its the bearing if not it could be something that has fallen from a pocket and got stuck between the metal clothes drum and the oute drum casing. a take apart job i am afraid for both issues.

Oct 29, 2006 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...