Question about Russell Hobbs Kitchen Appliances - Others
Posted by Anonymous on
Remove water connection and test to make sure you a re getting water to dishwasher. Then check water level sensor these are sometimes a small plastic piece that moves up and down with the water level. Make sure it is not stuck. Some are a stationary sensor that you may need to clean. Next ,I would check to see if you are getting power to the fill valve. Turn on D.W. and check for voltage at fill solenoid which should be right where the water connects to the unit. If you have power solenoid may be defective.
Hope this helps
Posted on Aug 24, 2019
Check for defective fill valve or cycle timer
Posted on Aug 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Just open the top cover and find the location of the bulb , it may be in the right side near the control panel. Remove the bulb and get a similar bulb with the same rating from any electrical shop and fix it
Posted on May 26, 2009
I have the Breadman Jnr and I can send you the recipes but I'll have to type them all up.
Prepared to do this and send them to you for US$50.
Would you be interested in the service?
You can contact me via email: email@example.com.
Posted on Jul 04, 2009
If everything else is normal, the trouble may be a failed magnetron tube (the microwave source), problems on the control circuit board, or parts in the tube power circuit that are bad. It's also possible a door switch can be at fault, but this usually keeps something else (fan, turntable or light, most often) from running as well.
Microwave servicing is best left to professionals. There are potentially deadly voltages present, and a chance of microwave leakage if repairs aren't done correctly. Take the oven to a shop for an estimate, or just consider replacing it if it isn't a built-in, an over the range unit or a high-end countertop model.
Posted on Feb 02, 2010
Tips for a great answer:
Sep 03, 2018 | Russell Hobbs Irons
Jan 09, 2018 | Russell Hobbs Kitchen Appliances - Others
Dec 21, 2017 | Russell Hobbs Irons
May 30, 2016 | Russell Hobbs Irons
Jan 13, 2016 | Russell Hobbs Kitchen Appliances - Others
Aug 07, 2014 | Russell Hobbs RH1042 Frontload Washing...
Nov 25, 2012 | Russell Hobbs Pf Easy Fill Heather 2400w...
Oct 26, 2010 | Russell Hobbs Kitchen Appliances - Others
Jun 29, 2009 | Kitchen Appliances - Others
29 people viewed this question
Usually answered in minutes!