Question about Washing Machines

1 Answer

Hello I have a front loader washer, my problem is not all cycles work. The only one that does is the gental cycle. Can,u help me

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Have you tried resetting the washer? Unplug your washer. While it's off, press and hold the START/PAUSE button for 5 seconds. Plug it back in and see if all of the cycles work.

Posted on Aug 23, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
wagdom
  • 64 Answers

SOURCE: indesit wg1130t front loader washing machine

maybe the drive belt is off/broken. Take the back off to check

Posted on Oct 31, 2007

  • 3 Answers

SOURCE: Ge Adora Front Loader

If you have not already done so, clean the filter behind the panel in the front bottom of the washer. Remove the three philips head screws to get the panel off. Unscrew the plastic filter on the right hand side (use a shallow cake pan to catch any water). Remove the filter and clean out the pens, pencils, change, lint, etc... and put back in. All should work well after this. Thanks, Greg

Posted on Jan 03, 2008

SOURCE: kenmore 417.29042992 front loader washer

If front loader washer quit spinning, check the wax motor switch. You can make a temporary fix by providing a short on the door lock contact. The Kenmore 417.29042992 front load washer provides a test connector that's readily accessible behind the front lower panel. Insert a wire between connector pins 1 and 2 (red and white/red color wires) and your washer should spin during the spin cycle. Hopes this helps.

Posted on Jan 28, 2008

  • 131 Answers

SOURCE: fridgidaire front loader washer/ problems with softner dispensor

In the back of the dispenser is a button / lever to press down to remove the entire dispenser. Remove it and take off the cover over the fabric softener / bleach chambers. You may find some junk under the cups in that cover, or in the tubes sticking up through the bottom of the dispenser.
The way this thing works is like this: You fill up the dispenser with the liquid, but that liquid doesn't get up to the top of the tubes. When it's time to dispense, the washer adds water to the appropriate chamber, raising the level to above the tube. The liquid then goes down the tube, creating a suction which (ideally) draws the rest of the liquid up into the cup, over the edge of the tube, and down the dispenser. The washer will add water several times to accomplish this. The system isn't perfect, but it usually works with few moving parts.
If the fabric softener is especially thick, it will have a hard time getting siphoned down through the tube. If it looks as thick after the wash as it did before the wash, the machine isn't adding the water to the cup. I believe on the Frigidaire, there's a separate valve (all part of the same valve assembly) for each dispenser chamber. If it isn't adding the water, you'll have to replace the whole valve assembly.

Posted on Mar 12, 2008

  • 662 Answers

SOURCE: Duet Sport HT WFW8400TE Washer: Whirlpool Duet Sport HT front loader is stopping b...

First check your washer plug to see if the connections are tightly screwed. Next check your filter if you haven't for long.

Remove the 3 screws at the bottom of the front panel under the washer door. Your filter door will be light brown. If you find a hose there it is to drain out excess water (water that could not be drained by your pump) After you hv drained unscrew the cap and remove all the junk inside. Have a large plastic bag to catch junk and water. Refit carefully after cleaning out. If not solved, something shd be blocking your pump, check this out

How abt a nice rating for the free help? Thnks

Posted on May 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front loader won't start on certain cycles


Hello sidneyskiss - From what you have described if only the normal cycle is working, then there seems to be a communication problem coming from the main control board or wiring failure. Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart washer. If it proves to be ineffective, I would suggest contacting a professional technician to move forward accurately.

Jan 08, 2013 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

I have a neptune front loader, after the wash cycle is complete the clothes smell like they have not even been wash with a **** moldy smell. I use Tide HE as directed but they still smell like i...


Hello, Thank You for using FixYa. I will be helping you today.Try 2 cups of white vinegar on a heavy duty cycle with hot water.Pour it in the detergent dispenser after it starts to fill. Also the affresh tablets work good i would use 3 tablets at one time if your unit is as bad as you say.
Thank You and please rate my answer if it was helpful..

Jun 17, 2011 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

My front loader washer does not agitate during


It is possibly the motor brushes. worst case scenario is the motor complete.

Jul 05, 2010 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Maytag front loader HE washer.


cheak your tube if there is a nail or an object is stuck in one of the holes

Jan 24, 2010 | Maytag MAH6700A Neptune High Efficiency...

3 Answers

How to change the belt in my whirlpool washing


It's probably the washer transmission. Belts aren't common anymore & besides it wouldn't work at all if there was a belt broken.

Jun 18, 2009 | Whirlpool Washing Machines

1 Answer

During spin cycle washer spins fine but toward the end of the cycle it spins out of control like it is out of balance? Any help is greatly welcomed.


Some front loaders have a super high speed at the end of the spin. Front loaders don't like small loads, the laundry does not spread out evenly enough for a balanced spin.

May 08, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

AWM8121 Drain/Spin cycle stops


it seems to point to blockage in drainage pipe from drum likely to be a lost sock remove pipe and check

Jul 05, 2008 | Whirlpool AWM6120 Front Load Washer

1 Answer

Indesit wg1130t front loader washing machine


maybe the drive belt is off/broken. Take the back off to check

Oct 09, 2007 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...