Question about Refrigerators
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
J, As you open the freezer door the LED on the right should flash 2X with a pause repeatedly. When you hold the left side emmiter down the light should stay on steady. If you have this, you know the optics are good unless the ejector blades are not home. First thing to check is where the ejector blades on the ice maker are parked. They should be resting in the 2:00 position. If they are not, you could have a broken module. If they are in the 2:00 positon the next thing to check would be the fill tube. You want to make sure it is not frozen over. You can disconnect it from the back and see if you can blow through the line or visually inspect it. If all of the above mentioned check out, jump start the ice-maker. Remove the quarter inch screw holding the harness cover on the right side. Remove the harness cover. Pull the ice-maker straight out but be carefull not to smash the emmitter flap on the left side. Leave the harness connected. Get a jumper wire with the ends stripped apout a 1/4 inch. Unplug the refer and place the jumper in test holes T&H. Leave the jumper in and place the ice maker on the shelf where you can close the door. Close the door and plug the refer back in. Wait 30 seconds and open the door. The ice maker should be cycleing. Pull the jumper and place the module cover back on. Put the ice maker back in the rails. It should fill at approx the 12:00 position. Let me know how you make out. Catriver.
Posted on Jul 08, 2007
check the water valve on the back of the ref. it sends water to the ice maker and water in the door one can work and the other one not
Posted on Apr 30, 2008
I hate to ask the obvious but is your water supply turned back on since the filter change?
Posted on Feb 10, 2009
SOURCE: Ice maker not working
If your ice maker has stopped producing ice completely, check these, in this order:
Posted on May 30, 2009
Tips for a great answer:
Aug 05, 2013 | Refrigerators
Jul 25, 2012 | Frigidaire Refrigerators
May 24, 2012 | Refrigerators
Jan 05, 2011 | Kitchen Ranges
Jul 22, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator
Mar 05, 2009 | GE Profile PSW26P Stainless Steel Side by...
Apr 30, 2008 | Whirlpool ED2FHEXN Side by Side...
Sep 03, 2017 | Refrigerators
Sep 17, 2019 | Refrigerators
Sep 17, 2019 | Dometic Refrigerators
26 people viewed this question
Usually answered in minutes!