Question about RCA Televison & Video
I bought a used RCA VR319 VHS player and it worked amazing. My husband ejected a movie, put in another tape, and now it keep flashing power, but won't play, and the TV goes from blue VHS screen to "no signal" as the machine does its flashing. What happened? Oh, and it won't eject the tape that's in there now.
Hi Yvonne, as you comment, there may be two reasons for failure, the internal RCA straps stretched and therefore fail to transmit the movement so that it works correctly and the other reason, the VHS tapes, which are wet
Observe through the two upper windows of the Video cassette, that the tape is without any white spots, if white spots appear, these are due to moisture and the tape with humidity, it cannot move correctly inside the video cassette, and can cause the fault what do you describe
Also verify that the drum of the video heads is clean and free of moisture
I hope you can watch your videos
Regards Franco Dosil
Hola Yvonne, por lo que comentas, puede haber dos motivos de falla, las correas internas del RCA estiradas y por lo tanto no logran trasmitir el movimiento para que fun cione correctamente y el otro motivo, las cintas VHS, que se encuentren humedas
Observa por las dos ventanas superiores del Video cassette, que la cinta se encuentre sin ninguna mancha blanca, si te aparecen manchas blancas, estas son por humedad y la cinta con humedad, no puede desplazarse correctamente dentro de la video cassettera, pudiendo producir la falla que describes
Verifica tambien que el tambor de los cabezales de video, se encuentre limpio y sin humedad
Espero puedas ver tus videos
Saludos Franco Dosil
Posted on Sep 04, 2019
Testimonial: "There is no moisture. The video cassette is stuck in the machine, so there is no way to check anything on it anyhow. We haven't had high humidity in a while, so there would be no reason for machine or tape to have any moisture, and we take good care of our collection."
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
sad to say that the problem of your camera is the timing gear is already damage....it need to disassembly the camera to fix the timing gear....go to the qualified service center for fixing or replacing the timing gear..
Posted on Aug 21, 2007
SOURCE: VHS player stops
VCR is set with blank tape..Bring up vcr control on TV with television set on Chanel #3, go to menu
Follows procedure for progamming date,time start,time finish,chanel and.speed and single recording.finally click on menu and turn vcr off. Vcr lights indicate set for taping,,.Does no start to tape at requested time and lights indication taping ready stays on ??????
Posted on Nov 07, 2007
no reset, the infred led inside the unit are bad and need to be replaced common problem, they are located on the ends of the tape mech.
Posted on Dec 04, 2007
Sometimes a gentle slap with the palm of your hand with the door facing towards the ground does the trick, make sure you power it off then on press eject while you gently slap it.
Good luck and thanks for using FixYa!!
Posted on Apr 21, 2009
I have the same unit (Magnavox DVD/VCR MWD 2206). If the top cover was removed, the DVD player would work fine. But if the clear plastic sensor post on the VCR side is covered, the unit would shut off. I removed the screw holding the sensor post in place and cleaned the led light under it using a cotton swab with rubbing alcohol on it. Then I screwed the clear plastic sensor back in place and cleaned it the same way. The unit now works great!
Posted on Jan 09, 2012
Tips for a great answer:
Jun 28, 2012 | Sony RDR-VX530 DVD Recorder/VCR
Oct 18, 2017 | RCA DRC8295 DVD Recorder/VCR Combo
Dec 21, 2017 | RCA DRC8312N DVD Recorder/VCR
Apr 15, 2010 | Televison & Video
Jul 12, 2008 | Samsung DVD-V8600 DVD Player/VCR
Jan 02, 2008 | RCA DRC8335
Dec 24, 2007 | Televison & Video
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: