Question about Sharp Aquos Televison & Video

Open Question

It's a new sharp aquos 42inch tv and I want to install if i enter new installation then It's write input password

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: Sharp Aquos Color Variations

Put the OPC off and check the conection for Pb signal.

Posted on Dec 06, 2007

Ad
  • 53 Answers

SOURCE: My Sharp Aquos 46" LCD

Digital inputs on Aquos TV's are "always on," usually the HDMI inputs and DVI inputs. As opposed to analog inputs 1, 2, or 3, are only activated once something is plugged in.
Try plugging in another HDMI sources into input4 or 5, if its still not working, the TV needs a new Main Board. Try calling Sharp 1-800-237-4277 and locating a local service center in your area.

Posted on Mar 14, 2008

  • 8457 Answers

SOURCE: sharp aquos no sound through hdmi

Reset all audio factory setting.Tries unplug,replug it well work,if ur backlight video board it still good.

Posted on Dec 17, 2009

Testimonial: "worked like a charm thank you so much, i was about to throw in the towel and get a new tv, now i don't have to thanks again"

  • 18 Answers

SOURCE: incompatible video signal has been recieved

I just had the same problem and it turned out to be the HDMI cable.

Posted on Oct 15, 2010

  • 4 Answers

SOURCE: tv remote controle codes for starchoice 5-in-1 remote (sharp aquos tv)

you might try unplugging the TV and then plugging in again. It worked for me

Posted on Nov 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The demo mode apears every 30 minutes. I can't really stand it. How can I shut it doen for ever? Sharp aquos LED 40"


I'm not certain of the specific model number of your set, but this should be the same for all Sharp Aquos models.

First, navigate to TV input, and select menu
Next, enter setup and select, "ez setup"
In the ez setup menu, select "home", not "store", for television location.

This should turn off the demo mode and solve your issue.

Jun 10, 2011 | Sharp AQUOS LC-40C32U 32 in. LCD TV

1 Answer

Sharp aquos no sound through hdmi


Reset all audio factory setting.Tries unplug,replug it well work,if ur backlight video board it still good.

Dec 17, 2009 | Sharp Aquos LC32D41U 32 in. LCD TV

1 Answer

Lc-32pd5x its a roof mount antenna not sure what brand it works fine on my other lcd


so you could not wait 1 minute while I wrote to you how to reset it?

by default from factory the pin code is 1234
heres the full user manual for your tv
http://www.cleverhome.com.au/user/Sharp-Aquos-Piano-Black-LC37PD5X-LC32PD5X-manual.pdf

if the code doesn't work heres how to reset the tv

HOW TO SET THE FACTORY PRESETS
Turn off the TV by pressing POWER on the TV.
After waiting for about 1 minute, press and hold down RESET and press POWER on the TV to turn on the
TV.
All setting items (except TV channel) return to the factory presetting.

note Password will be cleared after running the factory presetting operation.
You can run the Auto Installation again by using the following steps.

1 Turn on the power of the TV.
2 Press MENU. (Make sure the menu screen displays.)
3 Press left or right to select “Setup”.
4 Press up or down to select “Auto Installation”, and then press ENTER.
5 Press left or right to select “Yes”, and then press ENTER.

Jun 17, 2009 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

1 Answer

Sharp Aquos 37" Audio Static Issue when watching DVDs


i have had to replace the hdmi input board on these units to fix them.

Jan 08, 2009 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

My Sharp Aquos 46" LCD


Digital inputs on Aquos TV's are "always on," usually the HDMI inputs and DVI inputs. As opposed to analog inputs 1, 2, or 3, are only activated once something is plugged in.
Try plugging in another HDMI sources into input4 or 5, if its still not working, the TV needs a new Main Board. Try calling Sharp 1-800-237-4277 and locating a local service center in your area.

Mar 14, 2008 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Hisense 42inch lcd tv


It sounds like it's the inverter panel which lites the lcd back light.
If it's under warranty, try to replace it, or take it in for svc.

Dec 23, 2007 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...