Question about Furniture

1 Answer

SONY STR DN-1030 will not power on. Gets green light then back to orange. We have unplugged and tried to reset, but nothing works. Have big house of company!!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 7,116 Answers

Hola Christine Waits, puedes hacer una actualizaci?n de firmware y ver si el problema se corrige
Otra prueba, intenta desconectar todas las conexiones de los altavoces y prueba si la falla contin?a.
Si no se apaga, verifica bien los cables de los altavoces y vuelve a conectar los altavoces uno por uno. para saber cu?l puede estar equivocado o qu? salida est? mal.
Si contin?a, puede tener problemas con la fuente de alimentaci?n o la etapa de amplificaci?n.
En este caso, consulte a un servicio t?cnico especializado de SONY
. Espero que pueda resolver el problema.
Saludos Franco Dosil

Hola Christine Waits, puede hacer una actualizaci?n del Firmware y ver si se corrige el problema
Otra prueba, intenta desconectar todas las conexiones de parlante y prueba si sigue la falla
Si no se apaga, revisa bien los cables de los parlantes y ve re conectando de uno de los parlantes para saber cual puede estar mal o que salga esta mal
Si sigue, puedes tener problemas en la fuente de alimentaci?n o en la etapa de amplificaci?n,
En este caso consulta un servicio t?cnico especializado SONY
Espero puedas resolver el problema
Saludos Franco Dosil
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dn1030

Posted on Sep 14, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
TVtechmaniac

David Makowski

  • 140 Answers

SOURCE: won't power up

This model has had problems with the keyboard buttons on the front panel,causing them not to work and canceling out the remote operation. To verify this,you need to remove the front panel so you can access the connector on the keyboard pc board and unplug the connector.After doing this,see if the remote control is able to turn on the tv (wait for it to power up because with the connector off, the green power light will be disconnected and will not light up when the tv is on) If the tv works, than you will need to change the ten individual switches on the board - part# 432P089010 (or just use the remote only)

Posted on Aug 21, 2007

Anonymous

  • 1 Answer

SOURCE: canon i550 printer stoipped printing

My cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker.

Posted on Nov 12, 2008

Anonymous

  • 2 Answers

SOURCE: 'How to fix flashing Power light on modem SB5100?

Check with your server.The registration details have been deleted.

Posted on Feb 10, 2009

Wayne Elliott

  • 73 Answers

SOURCE: have a dell dimension 4700 with orange steady light?

Turn the machine off and unplug the AC power then hold the power button in for about 30 seconds to drain any residual power. Plug it back in and turn it on, when you see the Blue DELL word press CRL+ALT+D and this should run a diagnostic on the hard drive. If it runs ok you will get a pass or fail on the hard drive. If you cannot get the diags to run you might have a bad power supply or motherboad/processor. I would find a known good power supply and try it before the motherboard.

Posted on Mar 09, 2010

freetek

Steve Allison

  • 5569 Answers

SOURCE: blinking green light tv won't turn on

I suspect both of you have a failed main power supply, this model may not be well-protected against brownouts or surges.
The main supply is usually a separate board and if you remove the lower rear panel, look for a board that seems to be related to the AC line and has larger components than the other boards. Some of them will be cylindrical and others block-like.
Look for a board number since this is a component that is often outsourced and may not be from the same manufacturer in every set. Call the nearest service center to inquire about repair or replacement costs.

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Vizio vw37l hdtv20a standby light on but wont turn on


you either have a faulty power supply or faulty main board. Vizio power supplies on the older sets are pretty decent. It's usually the main boards that go. These older main boards tend to be pricey so it may be better to buy a new set.

Mar 27, 2013 | Vizio VW37L 37 in. LCD HDTV

1 Answer

Tried unpluging and nothing tried al buttons nothing the computer was at a shop to BE FIXED AT SHOP OK CAME HOME STUCK IN POWER SAVE MODE BUTTON ORANGE ON MONITOR HIT GOES GREEN SAYS PAWER SAVE MODE HIT...


Press and hold the power button for 5 seconds this will turn the system completely off wait 5 seconds then turn it back on as soon as it boots up go into power options in the control panel and click the option from power saver mode to do nothing as there is a fault with some computers that it gets stuck in power saver mode

Jun 27, 2011 | Computers & Internet

1 Answer

When I turn on my Canon i560 printer the light blinks orange and green and will not print anything. I've tried to turn it off and on, unplug it and nothing seems to be working. What can I do to fix it?


try this. It is the reset for the waste ink error (8 flashes)

1) With the printer power OFF, while pressing the Resume button, press the Power button. (Do not release the
power button.)
2) While pressing the Power button, release the Resume button, press the Resume button again twice, and then
release the Resume button and Power button.
3) The green indicator flashes during initialization.
When the indicator stops flashing and remains on, press the Resume button 4 times to clear waste ink message.
(The indicator toggles between orange and green each time the Resume button is pressed.)
4) Next, press the Power button, and the green indicator will light, and the function will be executed.
5) Turn off the printer then back on and error should clear.

Aug 04, 2010 | Canon BubbleJet i560 InkJet Printer

1 Answer

STR-DH700 won't power up unless I unplug-plug it.


This is a logic problem with the internal microprocessor. A quick experiment: Turn the unit on for about 2 minutes and shut it down. Doe sit power uip in this case? If so, I'd suspect that the heat generated during normal operation is creating an internal problem thaty is preventing the micro from recognizing the "off" condition. The power data line is hung and is not being recognizwed by the micro so any attempt to turn the unit on will fail. The unplug/re-plug essentially clears or resets the unit.

If the unit is new, return it for warranty repair. It will be important to describe when the unit fails however. Try to see how long it must remain on for the problem to occur.

Update this with your results if the unit is not under warranty and we'll try to narrow it down.

Thanks,
Dan

Nov 05, 2009 | Sony STR-DH700 A/V Receiver

2 Answers

Error E42


Scanner light should come on at power up. Found ribbon cable connecting scanner unit to base had come unplugged from socket on circuit board. The ribbon cable is one of three found near back hinge of scanner and is hidden underneath the other two. It should drape over the edge of circuit board and then plug into small recepticle on inner side of board. I plugged it in and printer works again. Hope this helps.
Or try:----------------
TRY THIS STEPS... Reset Counter Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
IF THIS STEPS DOESN'T WORK, YOU NEED TO BRING THE UNIT TO YOUR NEAREST SERVICE CENTER...

Aug 30, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

Does not switch on and there is no orange chg.light or green ligh


Your' battery may be bad, have gotten disconnected, or the battery is dead, and the charger is bad.

Dec 29, 2008 | Sony DVP-FX810 Portable DVD Player

1 Answer

Canon i950 flashing orange green orange green


Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i950)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Aug 22, 2008 | Canon i950 InkJet Photo Printer

3 Answers

Str-D590


This is not a reset. Most likely one or more transistors have shorted and need to be replaced. Does the front display come on OK?
Dan

Apr 29, 2008 | Audio Players & Recorders

3 Answers

Optiplex GX260 won't boot


I had the same issue and accidentally discovered a temporary solution. Unplug the power from the back of the machine, open the case and unplug the ATX power connection from the motherboard. With the ATX cable unplugged, plug the power cord back in. When you try to turn the computer back on the power light should turn orange and fans should be spinning, with it powered on plug the ATX connector back in. That should turn the computer off. Turn it back on and it should boot fine. You can even shutdown and restart, but when the power is unplugged you will have to go thru the same process to get it back up. This sounds crazy but it worked on mine. Good Luck!

Nov 01, 2007 | Dell OptiPlex GX260 PC Desktop

Not finding what you are looking for?
Furniture Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furniture Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...