Question about Crock Pots & Slow Cookers

Open Question

I need to find someone to repair a tedelex pressure cooker handle. A small part fell out. Cape Town

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: lid of Russell Hobbs pressure cooker is broken

Try going to MarBeck.com they are a great source for small appliace parts.
http://www.marbeck.com

Posted on Dec 22, 2008

Ad
RyanFanMan
  • 342 Answers

SOURCE: Still very new Tedelex pressure

My pressure cooker does that too, you would have to wait until the steam starts to come out a lot, then it will pop out and start building up pressure. Hope this helps.

Posted on Apr 08, 2011

  • 33 Answers

SOURCE: Replace handle on the bottom part of the pressure cooker

Anna. I am the King of 'fixit' rather than replace it. BUT PLEASE Don't even try. Pressure cookers have the potential to EXPLODE. First hand knowledge...my uncle was severely burned when his cooker exploded. If you try to 'fix it' and mess up, you, your family, friends my be spending time in the burn unit of the closest hospital. To replace a riveted handle requires the rivet to be drilled out....too easy to mess up and 'nick' the cooker causing a weak point. Don't do it. Take some Christmas money and buy a new one. Roger

Posted on Jan 03, 2015

tonythetumbl
  • 323 Answers

SOURCE: Pin fell out of the power pressure cooker xl....steam coming out of handle...how do I put it back in?

Hi,
There are two parts to the 'float valve' pin which has fallen out.
The pin itself pushes back in from the underside of the pan lid,
BUT,
there should be a clear silicone grommet or washer, which slides over the pin from the outside. This is what holds the 'float valve' pin in place & stops it falling into the pan in use.
If you've lost the original grommet in the washing-up, there might be a spare which came in the original box with the pan.
If not, you can order the replacements from the manufacturer or on eBay.
(https://www.ebay.com/itm/Float-Valve-Sealer-Power-Universal-Pressure-Cooker-XL-YBD60100-PPC780-PPC770-New/302469900126?hash=item466c9c675e:g:A7QAAOSwkRpZpszq)
Best of luck.

Posted on Mar 14, 2018

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I purchase a complete handle for my Tower pressure cooker Model4306 Part no 1959376BS, it seems to be obsolete now


Hi there, I believe you can buy pressure cooker components on line. I am in the UK and have purchased spares for two prestige pressure cookers. I think tower parts may be available to online

Good Luck

Jun 08, 2015 | Crock Pots & Slow Cookers

1 Answer

One of the handles on our S-9898 pressure cooker broke. Where can we get a replacement handle?


Here is a site that has parts for 106 different pressure cookers http://www.appliancefactoryparts.com/pressurecookers/mirro?gclid=CP769LDwl7oCFWfhQgodvyIA4g
However, you will need the model number of the pressure cooker which might be on the bottom of the pan. The number you listed is the pressure regulator, not the pressure cooker.

Oct 15, 2013 | Mirro S-9898 Pressure Cooker Pressure...

1 Answer

Cooker manual needed for philippe richard 8 qt pressure cooker


I purchased a Philippe Richard 6 qt pressure cooker and the second time I used it I noticed steam venting out of the pressure handle lock. later I stepped on something in the floor. it was the aluminum part for the pressure lock. I didassembled the handle but don't know how to get the part back in place, please advise. thank you
Russell Johnson
Ozark, Arkansas

Dec 30, 2011 | Crock Pots & Slow Cookers

1 Answer

Still very new Tedelex pressure cooker: the red-headed pop-up valve seems to take for ever before "popping" and allowing steam pressure to build up. How long should I wait? Thanks, Nic


My pressure cooker does that too, you would have to wait until the steam starts to come out a lot, then it will pop out and start building up pressure. Hope this helps.

Apr 08, 2011 | Crock Pots & Slow Cookers

1 Answer

I am looking for a replacement lid for Rival slow cooker SCE502


I believe the design of the handle on the SCE502 is poor and will fail over time. The nut in ours fell out of the handle, and we were holding the black plastic handle while the glass lid was falling to the floor. Ours failed this weekend, and luckily, when the lid fell, it did not break. After looking over the lid and the black handle, I purchased a 1/4-28 screw and a 1/4-28 nut (original was corroded). I drilled a hole completely through the handle and now the black handle is securely attached to the glass lid with a stainless steel screw and nut..

Aug 23, 2010 | Rival 3755 5.5-Quart

1 Answer

Handle on lid fell off


Sorry you can not just buy the knob but you can get a new lid here.

http://www.abtecparts.com/rivalcrockpots.htm

I would recommend going to home depot to see if you can get a cabinet knob that would fit.

Good Luck and Please Rate FixYa!

Jan 11, 2009 | Rival 38601 Smart Pot 6-Quart

1 Answer

Lid of Russell Hobbs pressure cooker is broken


Try going to MarBeck.com they are a great source for small appliace parts.
http://www.marbeck.com

Nov 22, 2008 | Russell Hobbs RHNPC800P 8-Quart Slow...

Not finding what you are looking for?
Crock Pots & Slow Cookers Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crock Pots & Slow Cookers Experts

tsalagi152

Level 2 Expert

89 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Crock Pot and Slow Cooker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...