Question about Lexmark Office Equipment & Supplies

Open Question

I have a Lexmark model C544dtn that will NOT power on. It is plugged in and when it is turned on you can hear it clicking but that is all. The display is blank.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark C762 Color laser printer will not boot up, it is plugged directly into a 110 outlet, the cables are seated well, the USB cable is connected to the printer,


If it seems to power on but you don't get anything on display.....you're LVPS (Low Voltage Power Supply) is shot. Needs to be replaced but Lexmark no longer support this model. You might be able to find one from third party parts site.

Nov 17, 2016 | Lexmark C762 Laser Printer

1 Answer

Nothing shown in the display


Please try these to fix your problem:
  • Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
  • It could be that your printer is not getting enough power to turn on. Try to plug the printer to a different known working power outlet.
  • Make sure your printer is updated. Please visit the Lexmark website to download and install the Lexmark Pro800 Series Firmware Update.

Oct 08, 2011 | Lexmark Prestige Pro 805 Color All-in-One...

2 Answers

I don't have installation cd of lexmark x2450. how can i do it to install?


Any drivers you need can be found on the lexmark website. Note that some printers need the software installed before hooking up the printer. I'd try to install the printer first. The software will tell you if the printer needs to be connected.

Jun 13, 2011 | Lexmark Computers & Internet

1 Answer

My printer Lexmark X4270 is displaying on it's screen always Error #1203. what can I do?


error 1203 is cartridge error, cartridges has a short
1. press power button to turn off your printer
2. unplug your printer to the wall outlet
3. plug in your all in one
4. reinstall your cartridges
if this does not resolve the problem replace your cartridges with new one
for more trouble shooting option :
1. click start> program> lexmark 4200 series> lexmark solution center
2. click the trouble shooting tab on the left side of the screen
i hope this helpful
thank you for using fixya

Feb 03, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Where is the toner cartridge and how do I find it?


Plug the Lexmark 2600 into an electrical outlet and press the power button. Allow the unit to power up. The power button will turn green when ready.


Turn on the Printer and Open the top cover of the Lexmark 2600 by lifting the cover upward. you will find all cartridges down there.



Now you see how to replace them


Remove the black ink cartridge from it's packaging. Remove the tape from the black ink cartridge first and place the cartridge into the left ink cartridge holder. Press the cartridge down into until you hear it lock into place. Close the ink cartridge holder lid by pressing it down firmly. This secures the ink cartridge in place.


Remove the colored ink cartridge from the packaging and remove the tape from the cartridge. Place the cartridge into the right cartridge holder and press down until it clicks into place. Push down the cartridge holder lid.


Close the lid of the Lexmark 2600 and allow the print cartridges to align. The power light will be blinking while the cartridges are being aligned; once the power light turns solid, the printer is ready for use.


Do rate, if found helpful

Nov 27, 2010 | Lexmark X2600 InkJet Printer

1 Answer

Power button not working on Lexmark X2530 multifunction printer


OK, if you can work a volt meter it will help. We want to double check the output of your power supply (P/S) based on the specs written on it , or in the manual. If the P/S is known good, when the printer is turned on, do you hear anything? listen for the faintest fan. If you hear a fan, printer is getting power. if you hear nothing and see nothing, check for a fuse by the P/S plug in somewhere. If you don't see one outside, there is one on a board that needs replaced inside the printer. Check the fuses for continuity. Ill bet its as simple as a bad P/S, lexmark is cheap plastic ****, but still lasts longer than THAT!

Oct 13, 2009 | Lexmark X8350 All-In-One InkJet Printer

1 Answer

TV will not turn on.


hello..i think you have very big problems inside on you're TV you need a Electronics Technician to see inside the real problem.my tips is located in Power Supply Regulator..Can i know what kind TV Model???thanks

Apr 23, 2009 | Televison & Video

2 Answers

Error Message


Turn off power to the printer and unplug it from the back of the printer.

Insert the power cord back into the printer. You will hear some clicks and motors moving. Pull out the cord again when this happens.

Open the cartridge bay by pulling the face forward and lifting the bay door up. The cartridge carousel most likely will not come to the center.

trying physically pulling the carousel to the middle. (NOT BY THE RIBBON CABLE) If you can not pull it to the middle push it far right as possible. Listen for a click.

After pushing to the right and hearing a click you should then be able to pull the carousel towards the middle easily. Remove the ink cartridges and power up the printer again.

You will receive an error along the lines of black cartridge missing. Open the bay, insert the cartridges, close the bay.

Mar 02, 2009 | Lexmark X4270 All-In-One InkJet Printer

2 Answers

It doesn't turn on!


If your Macintosh computer won't turn on, here's how to troubleshoot it. Please keep in mind that although your computer may display similar symptoms that prevent it from showing video, this article discusses what to do if the computer won't turn on, meaning that when you press the power button:
  • You don't hear a startup chime
  • You don't hear any fan or drive noise
  • The power button or power indicator doesn't light up at all
If your computer doesn't display any video, it may display one or more of these similar symptoms when you press the power button:
  • You may hear a startup chime
  • You may hear fan or drive noise
  • You may see the power button or power indicator light up
If any of these conditions occurs, see the Troubleshooting: My computer has no video article instead. If your computer won't turn on, try each of these steps:
  1. Make sure that the power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
  2. Make sure that the power adapter is properly connected to the power port on the back of the computer.
  3. Disconnect all accessories that are plugged into the computer, such as a printer, hub, or iPod.
  4. Reset the computer's PMU or PRAM.
    • For a portable (iBook or PowerBook), click here for instructions.
    • For a Mac mini, click here.
    • For an iMac, click here.
    • For a Power Mac, click here.
    • For a Mac Pro click here.
    • For a MacBook or MacBook Pro, click here.
    • For any other computer, click here for instructions on resetting the PRAM.
  5. Try plugging a different power cord into the computer (if you have a working one available). If the computer starts up, replace the old power cord. You can get a replacement cord for some models here.
  6. If the computer uses a power adapter, try connecting a different power adapter to the computer (if you have a working one available). If the computer starts up, replace the old power adapter. (Computers that use a power adapter include MacBook, MacBook Pro, iBooks, PowerBooks, Power Mac G4 Cube, and Mac mini.)
  7. If you tried all of the steps above and the computer still won't turn on, contact Apple technical support (1-800-APL-CARE in the U.S.) or take your computer to your local Apple Store or Apple Authorized Service Provider (AASP) for diagnosis.

Feb 22, 2008 | M-Audio US85100 Keyboard

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...