Question about Office Equipment & Supplies

Open Question

How to solved e-studio 2000ac adjusting wait until printing resumed

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean call for service F101 in toshiba e.studio 2000AC


"Call for service" means call to have a repair technician come out to fix the machine.

Aug 18, 2017 | Toshiba Office Equipment & Supplies

Tip

The Service Test Print for Canon BJC-5000?


1: Power off printer.2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print .
This will help.Good Luck

on Mar 10, 2010 | Office Equipment & Supplies

Tip

The Service Test Print for Canon BJC-5100?


1: Power off Printer.2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print .
This Will Help.Good Luck.

on Mar 10, 2010 | Office Equipment & Supplies

2 Answers

Error 6502


Dear Asker
how would i know this error is for which printer so i am assuming it's cannon.
Sometimes the Canon printers which use PG-5BK/CL-8 colour cartridges with chips will give error mesaages like 6502 or other types of error meaasge to do with the cartridges, which has the orange light flashing and the printer will not work. Follow this procedure which quite often resets the printer and allows it to resume printing.

When error is indicated, turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be releasedbefore doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Incidentally, you may find that if the chips had previously been disabled,the low ink warnings are showing againand they will have to be disabled once more. This would indicate that the above procedure clears the firmware memory of the disabling of the chips, this may be usefull if you need some warranty work done on you printer after the chips had been disabled. Canon does warn that disabling the chips may result in the printer's warranty being voided

Feb 28, 2011 | Office Equipment & Supplies

1 Answer

When I start my canon MP140, I have an E5 error......How to solve this problem, please..???


E5 = waste ink counter is full.
To reset that
1. Turn printer OFF with the button;
2. hold down RESUME and then hold down POWER;
3. release RESUME;
4. press RESUME twice, then release POWER;
5. wait until the print head has finished moving an press RESUME.

Feb 28, 2011 | Computers & Internet

1 Answer

Install the correct print head


You can clear the errors in your printer in three reset procedures.

Reset it manually
1. Turn off the printer
2. Press and hold the Resume Button, an indicator light green
3. Press and hold the Power button
4. While holding the Power button, release the Resume button
5. While holding the Power button, press the Resume button twice
6. Release the Power button
7. Press the Resume buttons four times
8. Press the Power button to confirm the operation
9. Turn off the printer

Reset canon mp600 to factory setting (if the first procedure did not work)
1. Press the Home button
2. Use the Easy-Scroll Wheel or the right/left arrow to select Settings, and then press OK button.
3. Use the Easy-Scroll Wheel or the right/left arrow to select Device settings, then press OK button.
4. Use the Easy-Scroll Wheel (B) or the up/down arrow to select Reset Settings, then press the OK button.
5. Use the Easy-Scroll Wheel or the up/down arrow to select Yes on the confirmation screen and then press OK
6. Press the HOME button to return to the Home Menu

Final reset (If errors did not clear and or another error appears this will clear it)
1. Press and Hold the Resume button and wait until the printer self restart.
2. Release the Resume button when the printer restart
3. Wait until the printer fully initialize and try printing again.

That will solve it.
Please comeback and give some ratings.
thank you for using Fixya.
moz-screenshot-2.pngmoz-screenshot-3.png

Aug 18, 2010 | Canon PIXMA MP600 all-In-One InkJet...

2 Answers

I need to know how to reset my printer, I 've cleaned the pads, but nothing... Thank you in advance...


Power down the Canon Pixma IP4300. Once it has shut down, leave it off for a few moments.
Hold down both the "Resume" button and the "Power Button." When the printer begins to restart, release the "Resume" button but continue pressing "Power."
Push in the "Resume" button twice, then let go of both the buttons. In a moment, a green light flashes a few times.
Press the "Resume" button four times once the green flashing has finished.
Push the "Power" button again until the printer shuts down. Wait a few seconds, then press the power button again to restart the device. The Canon Pixma IP4300 will now function properly. for more information http://www.fixyourownprinter.com/forums/printer/67824 hope this helps you.

Aug 18, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Green light, followed by yellow light flashes 5 times, then green again. Print screen says operator error, press printer's resume button.


Hi there
You can try not really know but it like your waste ink needs to be reset.

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Wait until print head stops moving
5. Press RESUME four times (if four doesn't work try three times)
6. Press POWER once
7. Press RESUME four times (if four doesn't work try three times)
8. Press POWER once

Repeating the RESUME/POWER code twice made the difference, the fixes I found wouldn't work because they stopped at step 6.



Feb 12, 2010 | Canon I960 InkJet Photo Printer

1 Answer

My canon i950 waste ink absorber is almost full


1. Start with the printer OFF
2. Hold down RESUME and then hold down POWER
3. release RESUME
4. press RESUME twice, then release POWER
5. Let green light blink until printer is done moving print head.
6. Select functions below with RESUME press POWER to execute:

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Mar 17, 2009 | Canon i950 InkJet Photo Printer

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...