Question about The Video Game Consoles & Games
Connected via HDMI? Make sure you are scrolling the Source button on the remote to access that HDMI port or whatever input you are using..
Posted on Sep 30, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: hooking up wii
you can do it multiple ways. like putting the cords into the dvd then putting the dvd cords into the tv, or put it into the tv, or hook it up to satilitte and hooking up to the tv. your choice.
Posted on Dec 26, 2007
SOURCE: polaroid tv Wii connection
Your LCD TV should have one of the following types of inputs:
If your TV has these, which it should, then the cable that comes with the Wii will plug directly into these jacks. Plug the yellow to the yellow jack, the red to the red jack, and the white to the white jack.
In order to connect to this input, you will need to purchase an S-Video output cable for the Wii. Most stores that sell Wiis will sell a third-party cable for this.
This connection will give you a significantly better picture than Composite.
S-Video does not carry audio, so you still need to plug the red plug into the red jack and the white plug into the white jack or you'll get only video and no audio!
This connection will give you the best picture, and you can set your Wii to EDTV (Progressive) mode.
To connect to this input, you will need to get the Wii Component Video cable. Most stores that sell Wiis will either sell the official Nintendo one, or a third-party cable.
Connect the red plug to the red jack, the green plug to the green jack, and the blue plug to the blue jack. Also connect the red audio plug to the red audio jack and the white audio plug to the white audio jack.
Be careful not to get the red audio plug confused with the red video plug!
If you see a picture, but the colors are wrong, then you either swapped the red and blue, or you connected the red audio plug instead of the red video plug.
Posted on Apr 05, 2008
It sounds like you have a pretty new TV. This means that there should be multiple AV jacks in the back for setting up your many components. Plug in the receiver into #1, the Wii into #2, and any other equipment you may have (DVD, VCR etc.) in the same way. You should then use the original TV remote to switch between Video 1, 2, 3 and so one for each compnent you want to use. The button on the remote will be labeled video, tv/video, input select, or input, something like that.
Hope this helps!!
Posted on Jan 02, 2009
SOURCE: hooking up wii and dvd to tv
does your tv have scart sockets?
if so you can buy this adapter that on one side is the scart socket and the other is the yellow red white sockets
something like this
Posted on Dec 31, 2009
I suspect you have it hooked up wrong check, Color to color, this is what can make it green, if not that then ensure your format is ok either PAL or NTSC, check.
Posted on Apr 02, 2010
Tips for a great answer:
Jul 27, 2018 | Smart Video Game Consoles & Games
Jul 28, 2016 | Samsung 40" 1080p 120Hz Slim LED Smart TV...
Feb 14, 2015 | Nintendo Wii Console
Jul 15, 2011 | Nintendo Wii Console
Apr 17, 2011 | Nintendo Wii Console
Dec 12, 2009 | Nintendo Wii Console
Nov 29, 2009 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV
Nov 09, 2009 | Nintendo Wii Console
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: