Question about Amana Easy Reach AFD2535DE Bottom Freezer Refrigerator
Our Amana fridge/freezer is not operating properly. The freezer section is running fine, but the fridge is at 60 degrees. There is no cold air being blown into the fridge section from the freezer. The condenser fan is operating, but we do not know how to check if the evaporator fan is operating.
You will be able to hear it when you open the freezer door and hold the door switch in.It is located behind the rear panel inside the freezer. The fan should be running when the compressor is running. If it is running make sure the damper(vent) to the fridge side is not blocked by ice and that the damper door is open.
Posted on Oct 08, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 04, 2012 | Amana Refrigerators
Its defrost problem, the freezer should cool,
then freeze, then defrost cycle should start. In your case freezer is cooling,
then freezing, but its not defrosting. That's why fridge section is not
Click this link below and follow the
This will help.Thanks.Helpmech/.
Oct 26, 2011 | Amana ABB1927DE Bottom Freezer...
May 19, 2011 | Amana ABB1927DE Bottom Freezer...
Apr 13, 2010 | Amana ARB2217C Bottom Freezer Refrigerator
Jul 13, 2009 | Maytag MSD2756G Side by Side Refrigerator
May 26, 2009 | Amana SXD524VW Side by Side Refrigerator
Oct 29, 2008 | Amana ABB2227DE Bottom Freezer...
Few questions first. 1. What is the entire model # on the sticker inside the fridge section? 2. Is the fan in the freezer running? 3. Is there a thick frost build up on the back panel in the freezer (look at the bottom half for a side by side)?
Oct 20, 2007 | Refrigerators
750 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: