Question about Brother XR-65t Mechanical Sewing Machine
I can't figure out how to thread a bobbin on my Brother XR-65
First, google your sewing machines name and model number and "manual" or "users guide" and you can find the link to the PDF download. Here is what I found:
1 Raise the needle to its highest position by turning the balance whell toward you (counterclockwise) and raise the presserfoot lever. Slide the button and open cover.
2 insert the bobbin so the thread comes out in a clockwise direction. Use bobbins intended for this machine. !CAUTION! Be sure the bobbin is set so the thread unrols in the correct direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or the needle to break.
3 Hold the thread end, push the bobbin down with your finger, and pass the thread securely through the thread cutting groove.
4 Replce the bobbin cover. Place the left tab in place then press lightly on the right side until the cover clicks into place. *insert the cover so that the end of the thread comes out from the back of the cover.
good luck and G.Bless!
Posted on Oct 16, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 04, 2018 | Brother Sewing Machines
Aug 25, 2017 | Brother Sewing Machines
Feb 12, 2015 | Brother Sewing Machines
Mar 06, 2013 | Sewing Machines
Mar 29, 2012 | Brother XR-65t Mechanical Sewing Machine
Oct 03, 2010 | Brother XR-65t Mechanical Sewing Machine
May 19, 2008 | Brother XR-65t Mechanical Sewing Machine
187 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: