Question about HP Color LaserJet 2600n Printer

3 Answers

Color alignment red prints below or to the right of where it is supposed to print, by about 1/64 of an inch. Just enough to make you think you need new glasses.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Clean or repalce sensor belt responsible for the wrong color register.

Posted on Feb 16, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

MY PRINTER HP COLOR 2600N RED COLRO NOT COMING

Posted on Feb 17, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • HP Expert
  • 222 Answers

You can calibrate manually directly from printer (quality menu)
If you using refilled toner cartridges problem will still persist and you must replace all cartridges whit new ones and then try to calibrate printer again...
Good luck!

Posted on Oct 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing print


machine needs drum and developer, but a temporary fix would be...open front door near notice green handle where toner is replaced, look to the right of green handle and down about 2 or 3 inches, you should see a plastic or chrome cover the size of a postage stamp, remove the cover and you should see a 3/4 inch wide piece of glass barely sticking out, carefully grasp the glass and pull it out of machine, wipe the toner off the glass , put glass back in and replace cover , shut front cover and run copies .

Jan 30, 2014 | Ricoh Aficio 2015 Copier

1 Answer

The copier feature of my new HP all-in-one Officejet Pro 8500A Premium is printing with vertical black line just right of center, whether black or color copy is selected. I have dusted, air compressed and...


lift up the feeder on top of machine where your big piece of glass is. to the side of that big glass is a small glass about an inch wide. most likely there is something on it. clean and you should be good to go.

razors

Jun 01, 2011 | HP Office Equipment & Supplies

1 Answer

Poor print quality


The "ghost" image is "burned" onto the drum.

A laser printer is supposed to charge specific "dots" on the drum, and the toner-ink is supposed to stick only to those "dots", the paper is pressed against the drum, and then the "fuser" uses heat to "melt" the toner-ink onto the paper, to produce the printed page.

You need to replace the drum.

Apr 07, 2010 | Konica Minolta magicolor 2430 DL Laser...

1 Answer

Red light is on Printer will not work after moving


Someone printed in color. I know in the last 2 printers I had , the printers had a feature that wouldn't let you print if the other inks went below a limit. I think its supposed to make sure printer quality is high. My guess is to install the cyan cartridge and see if you can print now.

For future maybe you could get an all black cartridge to alleviate this in the future.

Jan 09, 2010 | Xerox Phaser 8550DP Printer

1 Answer

Streaks on printed page full length even after installing new cartridge


Check the glass (the one the paper rests on). The underside of the glass that is. This is what the light 'sees', so, it will print this! 

Jun 03, 2009 | Konica Minolta PagePro 1350W Laser Printer

2 Answers

My camera not focusing


Dear juanvillar46 I found this important information to explaing better about the hand color and meannings


Understanding blur warning icons If the feature is turned on (see ), a picture blur warning icon autourg00531002id1716777.jpg is displayed during quickview and review.
spacer.gif Green - Picture is sharp enough for an acceptable 4 x 6-inch (10 x 15 cm) print.

Yellow - Picture may be sharp enough for an acceptable 4 x 6-inch print or sharpness is not determined.

Red - Picture is not sharp enough for an acceptable 4 x 6-inch print.

White - Printability is still being determined.


Your Rating is very important for me
"Was this helpful?"

Mar 30, 2009 | Kodak EasyShare C643 Digital Camera

2 Answers

When printing color, only prints shades of red


Keep on head cleaning until the test print will complete colors.

Jan 10, 2008 | HP OfficeJet r40 InkJet Printer

2 Answers

Scanning document leaves streak down right hand side


hmm this has happened before
make sure it is sitting straight and cleaning it might help

Jan 07, 2008 | HP PSC 1315xi All-in-One Printer

1 Answer

Not printing red ink clearly


i think problem could be solved
take out the cartige and the cartige holder , spray them with glass cleaning solution and replace them back

Nov 11, 2007 | Epson Stylus Photo 900 InkJet Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

824 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...