Question about Kyocera FS-1118MFP Laser Printer

1 Answer

My kyocera photocopying machine is asking me to callservice 6000 what can i do/ what does it mean?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

6000 simply means Broken fuser heater lamp wire
The temperature does not reach 100°C/212°F after the fuser heater lamp has been turned on continuously for 30 s. The temperature does not rise by 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 5 s during printing. 35/37 and 45/47 ppm printers (EUR/USAmodel):
Fuser thermistor M detection temperature does not rise by 1°C/1.8°F
after the fuser heater lamp has been turned on continuously for 10 s during warm-up or at standby.Fuser thermistor S detection
temperature does not rise by 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 5 s during warm-up or at standby.
Poor contact in the fuser thermistor M connector terminals.Reinsert the connector (See page P.1-5-19).Fuser thermistor M installed incorrectly.
Check and reinstall if necessary (See page P.1-5-19).Thermal cutout
triggered.Check for continuity. If none, replace the thermal cutout (See page P.1-5-19). Fuser heater lamp installed incorrectly. Check and reinstall if necessary (See page P.1-5-19).Broken fuser heater lamp wire. Check for continuity. If none, replace the fuser heater lamp (See page P.1-5-15).

Posted on Oct 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use Kyocera toner for utax Copy machine?


take the cartridge along to a ink refiller shop and ask them as they have a good knowledge of product inchangeability

Aug 12, 2016 | Kyocera Office Equipment & Supplies

1 Answer

Kyocera 2520 photocopier is won't startup


check the 15 amp fuse from the power cord to the pspcb or order new pspcb and replace it

Jan 10, 2016 | Kyocera Office Equipment & Supplies

2 Answers

Call Service 6000: 0037842


Call service in the 6000 range describes a problem with the fuser of the machine. you did not mention the model number of the machine, but on some of the machines this can be reset in the sevice mode under u163. Unfortunately on some of the smaller machines this will mean a fuser replacement.

Dec 14, 2013 | Kyocera Office Equipment & Supplies

2 Answers

C-6 400 what does it mean on kyocera KM-2020 photocopier machine


Hi my Kyocera KM2020 is showing an error code C-6 400, what does it mean and how do I fix it? Thanks

Jan 29, 2013 | Copystar CS-1650 All-In-One Laser Printer

1 Answer

I am Thomas from South Sudan my Kyocera Photocopier 1635 Series error code : C6000.What to do sir?


Mr Thomas, this code means Fixing error, firsf switch on your Photocopier Machine then press 1,0,8,7 again 1,0,8,7 display will change will show u000. then press 1,6,3 press start key two times. machine will go off and on again. try that ,if will not work i will give you onather way.

Jan 20, 2013 | Kyocera Copystar CS-1635 Copier

1 Answer

Bonjour, ma photocopier marque l'erreur de call servise c6000.Pouvez vous m'aider pour la resoudre SVP? merci d'avance!



Some codes can be reset by simply opening and closing the front door or by turning the machin on and off, but there are some others that can be reset only by a service representative. C 6000 code is one of them. There are several causes that lead to this problem, i;e:
1. Unstable power source
2. Low volatage
3. Broken thermisted wire
4. Poor contact in the thermister connector terminals.
5. Heater lamps are broken or not installed correctly.
Here is the process to reset c 6000.
Enter 1087-1087 (1087 twice) from the keypad.
U000 will be displayed.
Enter 163 by using the keypad keys.
Press "Start" (the green button) twice.
The code will be reset and machine will start automatically.
If this code is appeared again, you may need to check the fusing section of the machine and it shoud be done only by a service engineer.

Mar 22, 2010 | Kyocera Mita Kyocera-Mita SCANNER RACK...

1 Answer

CALL SERVICE 6000:0115785


Error 6000: is a fuser error 0115785 is your page count. You require a replacement fuser

Apr 14, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

Kyocera FS3900DN Error code Call Service6000:0057457


6000 is the error code 0057457 is the page count

6000 means the fuser is faulty, you're going to have to replace it

Jun 16, 2008 | Kyocera Office Equipment & Supplies

Not finding what you are looking for?
Kyocera FS-1118MFP Laser Printer Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...