Question about Zephyr Cyclone AK6500 Kitchen Hood

1 Answer

Can I replace the light bulbs without removing the whole panel ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

Yes, it is possible to replace the light bulbs without removing the panel that surrounds the two bulbs. The problem is that those bulbs get slippery because of cooking oil splatters.
I recommend that you use a paper towel and some window cleaner (aka: Windex) Spray the towel and clean the bulb. Let each dry and turn the bulb to loosen it out. Use the moist paper towel to help turn is needed. Be so careful to not break the bulb as you remove it. Good Luck!

Posted on May 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check engine light bulb is blown how do I replace it


In order to answer your question, I went to "e-bay" and looked up instrument clusters for your vehicle.
As I suspected, the bulbs are "peanut" bulbs, and they press into a small plastic socket, that twists off and back on the rear of the instrument cluster panel.
I don't think you will be able to change that bulb without removing the whole instrument panel cluster from the dash.
I might be wrong.
Look up under the dashboard and see if the back of the cluster is easy for you to see and get your hand up to.
If so, good.
God bless your efforts.

Nov 02, 2015 | 1999 GMC Safari

2 Answers

How to replace the rear signal light


The whole light assembly comes out and you can remove the bulb assembly from behind. There will be a couple of screws accessible from the trunk compartment behind the concealment panels.

Apr 07, 2014 | 2001 Ford Taurus

2 Answers

How do you change the light bulb on a pfaff 7550


If you look down on your machine from the top you will see a small whole with a screw in it (you may need to lift the handle).
The screw is a flatblade/philps/20 torks.
Losen the screw about 2 full turns (do not take it out).
pull off the panel on the left and you should be able to see the light blulb.
Turn the light bulb about 90 degee and it should droop out.
Replace with only a 120v 15w bulb.

Hope his helps

Apr 07, 2011 | PfaFF Creative 7570

1 Answer

2006 Cadillac SRX- how to replace front directional light bulbs without dismantalling the whole front bumper cover?


Just remove the air filter housing and the inner right fender plastic pins enough to flex it out of the way...... then you can remove the six torx screws and remove the bulb cover........change the bulb.
spray a little WD40 in the bulb socket first.

Feb 20, 2011 | Cadillac SRX Cars & Trucks

2 Answers

How do I replace the rear license plate light on a 2004 Pontiac grand am? The light bulb doesn't seem to be removable. I've removed the covering, but the silvery colored bulb appears to be stationary in...


in your fuse panel check for faulty fuse ,or you might have to replace the whole assembly,if at the part store there is no replacement bulb then its not removeable.

Oct 13, 2010 | 2004 Pontiac Grand Am

1 Answer

How do i replace the tail light bulb?


to replace the GM tail light bulb, you will drop down the tail gate and you will notice 2 screws on the tail light assembly, you will remove those 2 screws with the proper screw driver, once you do that the whole tail light assembly will come off, then you will see onother 2 screws holding the light panel to the tail light assembly, or brackets holding the light panel to the tail light assembly remove either or and you will have access to the three bulbs on that light panel, replace the burnt one and follow the same intrunctions to put back.

Apr 06, 2010 | 2005 GMC Canyon

1 Answer

Do you have to replace the whole tail light assembly to replace a blown stop light in a 2005 Land Rover LR3? It saeems like you have to remove the whole assembly to get at the stop light?


No. reach in from inside, remove panel, tiset and pull out bulb and socket. The other kind have screws that remove from inside than entire lens pulls out to remove bulb and socket.

Sep 09, 2009 | 2005 Land Rover LR3

1 Answer

How to replace rear turn signal bulbs?


Remove trim panel inside trunk. A plastic nut retains tail light assembly in body. Remove the bolt, slide whole tail light from body, disconnect the wires, twist bulb socket to access bulbs.

Jul 04, 2009 | 2005 Volkswagen New Beetle Convertible

2 Answers

Halogen light heater


I have same problem Took whole unit apart found upper bulb is connected with wire that goes through out. You hve to physically take bulb out through side without electronic panel wire is connected on panel sid with actual plug. but ended up cutting wire other side. Bulb is not like regular bulb you will have to hard wire one side of it. bulb is unseperable from wire. Still looking for replacement bulb. I sure miss my toaster I believe it will probably be chaper for me to buy new toaster vs replace bulb. The bulb is nothing like I have seen before.

Nov 03, 2007 | Toastmaster TLWTOB6 Lightwave Toaster Oven...

2 Answers

Broken light bulb


First of all, always disconnect the oven from the line before you remove or install bulbs, otherwise, you can damage the control board. We repair them all the time because of this. You can find helpful exploded view diagrams and order parts by entering your full model number (without the suffix) here: http://tinyurl.com/gv383 We have critical safety & disassembly info at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk

Apr 21, 2007 | GE JVM1430 Microwave Oven

Not finding what you are looking for?
Zephyr Cyclone AK6500 Kitchen Hood Logo

768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zephyr Kitchen Ranges Experts

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Treefrog15
Treefrog15

Level 2 Expert

130 Answers

Norman Worley

Level 3 Expert

1273 Answers

Are you a Zephyr Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...