Question about DISH Network ViP622 DVR DTV Receiver / 180-Hours Video Recorder

1 Answer

I lose my audio often for non-hd channels with dish 622 dvr

My dish 622 dvr is connected to pioneer a/v receiver. I keep losing the audio for the non-hd channels .
If I disconnect the hdmi cable (connected to the receiver) and plug back in(or reboot the dvr), the audio is back again.
I am trying to understand what the problem could be.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 56 Answers

The problem could lie in youir HDMI cable, this is a common issue. if you swap HDMI cables and still have the same problem then bypass your A/v rec and connect your 622 direct to your tv and see if the problem persists, it it does, then your DVR needs to be replaced, you can call dish for addition troubleshooting if it is in fact your DVR.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this resiver HD ?


am_witek,

Our 625 receiver is not an HD model. Our current HD models are ViP 211/211k, 222, 612, 622, 722/722k, 922, and our Hopper receiver.

If you have any other questions, let me know!

Tommy Faust
DISH Social Media Representative

Nov 24, 2012 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Dish HD-DVR connected to a Denon 3808ci via an HDMI cable. Problem is periodically, the screen goes black for a split second and then comes back. Rewind and play again the blackout doesn't repeat. When...


Your'e losing digital data from Dish or the DVR. Since even live TV is through the DVR it is always a potential problem when anything glitches. That it doesn't repeat on immediate rewind/playback says the data made it to the hard drive ok.

The Denon is only defaulting back to an analog audio feed upon loss of the digital (preferred) one.

If it affects the video AND audio simultaneously the cause is something common to them.

I'd look at HDMI cabling into the Denon from the DVR.

Don't blame the Denon just yet.

My $.02:

I'd skip the video right past the Denon to the TV/Monitor even if it means using component cables instead of HDMI, but keep digital audio coming in from the DVR. Added cabling and connections never improve anything. Plus, HDMI cables are expensive.

It would be interesting to see if the problem comes back and affects only the audio or the video.

If you use optical cable make sure it has smooth flowing curves and no small-radius bends that would lose light power.

http://www.retrevo.com/support/Denon-AVR-3808CI-Receivers-manual/id/3124dj391/t/2/

Feb 06, 2011 | Denon AVR 3808Ci Receiver

1 Answer

My 622 DVR dual (DISH ) receiver has lost 3 local channels in a row ( SAT 61.5) . Connecticut 7385,7386,7387 - (ch 20,24,26.) Other tv's/ HD box and old 310 box converters work fine. I have unplugged,...


Hello, my name is Daniel Busa with Dish Network customer service. Whats probably causing the issue would be that either you're not getting high enough signal strength on the 61.5 satellite. Otherwise there could be an issue with the box if you swap it with another reciever in the home, and the issue follws it you'll need a new box.

Oct 19, 2010 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

My dish DVR HD control doesn't work


lumaes200,

You have indicated that you have a 622 DVR receiver, since this is where your posting was found. When you trying any of the DVR functions on the remote, do you get an error message (024 or 311) indicating that the function is not available at this time? If not, try unplugging the receiver for 10 seconds from the electrical outlet. This will reboot the receiver and re-acquire the satellite signal. Once the picture returns, try the DVR function. If the problem continues, please call 1-800-333-3474; we may need to replace the receiver. I hope this helps.

Ray Calo
DISH Network

Apr 02, 2010 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

I have two vip 622 in my house and with one i can watch hd channels on both tv 1 and 2 but on my newest one i can only watch hd channels on tv1 and on tv 2 it says looking for satelite both have identical...


You may have a bad port on the back of the receiver, a cut or disconnected wire somewhere on that side of the system or a bad diplexer if the system is not straight wired to TV2.
The easiest way to verify whether the port on the receiver is bad is to connect that line directly to TV 1 off the back of the receiver. Remember to place TV one on the CHANNEL TO CHECK IF IT IS GOOD. If you have picture then you have a bad diplexer.

Hope this helps. Thanks for using Fix Ya.

Feb 23, 2010 | DISH Network ViP622 DVR DTV Receiver /...

2 Answers

I lost 60 hrs. of recording time in less than 24 hrs. on VIP 622


Remove all the External Storage devices, make sure that you Un-Plug them Completely including their Power. After Resting the Dish Receiver, Plug-In everything back on and try.

Mar 16, 2009 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

Dish Network VIP612 DVR - unwanted "Info" screen


The problem has nothing to do with the television. To fix it, simply change the remote address. The directions for this are in the Dish manual, or you can check it out on the website here: http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/receiver/622.shtml

Hope this helps.

Oct 18, 2008 | Kenwood RC-R0720 Remote Control

1 Answer

Receiver: Pioneer Elite 72TXV Verizon


Called Verizon automated help desk. They rebooted DVR remotely and solved the problem.

Mar 28, 2008 | Pioneer Audio Players & Recorders

2 Answers

Connecting a Dish 622 Receiver to the HTR500 and a Sony HDTV TV


I haven't researched to actual manuals for your equipment, but I'm guessing that the optical may be disabled when the HDMI is used. You could try using the component video outputs to the TV and then the optical to the Onkyo.

Jan 02, 2008 | Onkyo HTR500 Receiver

1 Answer

No Video


have you gone through the menu to assign which signals the receiver recognizes?  I had to change the source when i switched to the Dish Network HD receiver. 

Aug 24, 2007 | Pioneer VSX-1016 Receiver

Not finding what you are looking for?
DISH Network ViP622 DVR  DTV Receiver / 180-Hours Video Recorder Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...