Question about Hitachi UltraVision 42HDS52 42 in. HD-Ready Plasma Television

1 Answer

I have a 2006 Hitachi Ultravision 42 inch plasma

I have a 2006 Hitachi Ultravision 42 inch plasma TV. It's was working fine but now I can only get it to power up to stand by mode. It won't turn on when you press the power button on the side of the TV which is when the picuture would come on. BTW, the TV came with the house I just bought and we have not been able to fine the remote yet so if any of the answers require using the remote I don't have one just yet.

Thanks,
Mike

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hitachi Master
  • 53,745 Answers

Plasma tv units use a lot of power ,well into the hundreds of watts 9 some big screens use up to 800 watts to work)
I suggest that you consider a new led unit which uses barely any power and you will get a remote with it

Posted on Jun 24, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bluegreenash
  • 661 Answers

SOURCE: hitachi cle-990

not sure your model number is correct please check here is a manual for the 42 CL plasma TV http://www.hitachiserviceeu.com/scripts/userguide.php/CL42PD2100_EN.pdf if it is a different set please check the model number, this should have a 42 in it (as it is 42")

Posted on Sep 27, 2007

  • 1141 Answers

SOURCE: hitachi manual needed hitachi owners manual or user guide

Hello there
Here is a link to all Hitachi Plasma Tv manuals user guide owners manual and so on
I couldn't Find your model so perehps you should check again, but no worries the link is for ALL manuals so Enjoy It.

http://www.hitachiserviceeu.com/support/guides/userguides.htm

Tom

Posted on Oct 08, 2008

ron1235
  • 11 Answers

SOURCE: Need a pedestal stand for an AKAI 42" Plasma

do you have the small feet as shown in the picture? are they in your closet?

ebay?


Posted on Nov 30, 2008

Big Hev
  • 64 Answers

SOURCE: Vertical Green Bar 3" wide on the right side of my 42" plasma

My thought is that it is an Intergrated Circuit (IC). But it has been brought to my attention that it may be as simple as adding a "ground adapter" to the plug of the TV. If after you try changing out the ground adapter and it doesn't work, try "power cycling" your TV. (unpluging it... Waiting 30 seconds, then plug it back in.) If that fails, contact Hitachi so they can recommend an authorized service center in your area. Hope this helps. Good luck, KMarshall!

Posted on May 25, 2009

  • 1 Answer

SOURCE: 42edt41a hitachi plasma tv went dark sound ok

sounds like your y and z drive boards over heated and need replacing...

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi ultravision is hot, to the touch, Is there concern?


I've owned a 42HDX99 since 2007, It's always been warm/hot. Still works/looks Awesome. Plasmas do generally run hotter than
LCD/LED's. Also have a 58" Samsung Plasma ( which I've had to repair ) and a 2009 Toshiba 1080P LCD ( still works great )

Aug 27, 2014 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

I have a 42 inch Hitachi plasma tv that is making a very loud static noice coming from the internal speakers. It stays at a contstant very loud volume unless I completly mute the tv or turn the volum


Based on what you have tried if a buzz or loud static via the speakers you have something wrong in the audio output circuit of the set--problem here is that circuit may be part of the Main board that processes all signal---a look inside---following the speaker leads back would lead you to that board.

A simple thing to do to narrow it a little (you may have done this) is with sound all the way off put your ear to the internal speaker--hear anything at all like a deep hum?

Depending on age of set and cost of the board likely bad it may or may not be a do it yourself repair.

SD TECH

Apr 26, 2012 | Hitachi P42H401 42 in. Plasma HDTV

1 Answer

Hitachi 42" ultravision...power light on, hear


Tries pushes the power switch on the remote few times,each times push wait like a 1 mins or 2 mins for the tv Tuner signal board to take it effect.This process should get ur tv picture back,because the tv Tuner signal board it is old and having problems,evenually require replacement of a refurbish tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

May 23, 2011 | Hitachi UltraVision 42HDS52 42 in....

1 Answer

Blue vertical line appearing / flashing on Hitachi ultravision plasma tv model number 42HDS52A ??


So the lines goes up and down or is it across from side to side, if it's side to side then it's your terminal power board.

Jan 04, 2011 | Hitachi 42HDS69 42 in. Plasma Television

2 Answers

Hitachi ultravision projection that is turning off


Ur tv projection bulb,been a long time had not been replaced?If the the bulb been,replaced the ballast might be dead.

Apr 14, 2010 | Hitachi UltraVision 55HDS52 Television

1 Answer

Vertical Green Bar 3" wide on the right side of my 42" plasma


My thought is that it is an Intergrated Circuit (IC). But it has been brought to my attention that it may be as simple as adding a "ground adapter" to the plug of the TV. If after you try changing out the ground adapter and it doesn't work, try "power cycling" your TV. (unpluging it... Waiting 30 seconds, then plug it back in.) If that fails, contact Hitachi so they can recommend an authorized service center in your area. Hope this helps. Good luck, KMarshall!

May 25, 2009 | Hitachi 42HDS69 42 in. Plasma Television

2 Answers

Sound Problems with Hitachi 42HDS69


Probably the main board, audio processer blown. about 300.00 to repair. A service tech told me this and the repair worked.

Feb 17, 2009 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

ESA EDTV - 42 inch plasma TV, sound OK no picture.. has vertical lines.


pull plug. allow to reset. try again.
good luck on that, otherwise you need service.
good luck
mark

Nov 28, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


you have lookse connection on the video convergance amp ic

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 04, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

Not finding what you are looking for?
Hitachi UltraVision 42HDS52 42 in. HD-Ready Plasma Television Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...