Question about Kenmore 62602 Electric Dryer

1 Answer

I HAVE A KENMORE 90 SERIES AND THE DOOR KEEPS ON OPENING, SO I TOOK ALL OF THE CLOTHES OUT TO SEE IF THERE WAS TO MUCH IN IT, AND EVEN WITH NO CLOTHES IT OPENS?? IT DOSENT APPEAR ANYTHING IS BLOCKING THE DOOR FROM SHUTTING...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

Inspect the door and when you open it, does the latch hold the door closed? If not the dryer door / latch may need to be replaced.
But check the door as it opens... the door hinges may have been damaged, causing the door to not close properly and the latch may not be damaged, only the hinges.
Good Luck!

Posted on Jan 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix the door switch


What is the model number of your unit?

Nov 24, 2012 | Kenmore Series 70 80 90 PN281798 Dryer...

1 Answer

My Kennmore Series 90 door keeps popping open so the dryer stops


Could be a defective door latch.
Could be an over-loaded dryer.
If you are not over loading,then replace the door latch.
Cost about 5 bucks.

May 08, 2011 | Kenmore 63942 Dryer

1 Answer

Won't spin or rinse, took clothes out .... too heavy maybe??


you have a bad lid switch,you can by pass it,remove the switch,put the pos.neg. together with wire nut and your finished-mike

May 20, 2009 | Kenmore 23822 Top Load Washer

1 Answer

I have a Kenmore 90 series that i have to run through drying cycle twice before the clothes get dry"


try washing the lint screen it gets blocked if you are using fabric sheets

Apr 28, 2009 | Washing Machines

1 Answer

Kenmore 90 Series Washer


CHANGE THE LID SWITCH

Apr 18, 2009 | Washing Machines

1 Answer

Kenmore 90 series noise after spin


You need to replace the drive block and basket drive. You can download a tutorial to get you started at www.shop.washermd.com. The gearcase replacement tutorial will put you in the right direction. Dave

Mar 01, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore 90 series not drying.


remove the ventin from behind the unit you need to replace and or clean your vent !!!!!

Jan 16, 2009 | Kenmore 62602 Electric Dryer

1 Answer

Kenmore electric dryer series 90 model 66904691 will not start. Dryed a load of clothes went to start again will not do anything , checked fuse box, fuse not blown what could be the problem


Check the automatic door shut off switch and wiring. When the door closes it actuates a switch (completes and electrical circuit) which allows the dryer to operate.

Aug 23, 2008 | Kenmore Dryers

1 Answer

Kenmore 90 series noise after spin


Yes the brakes are grabbing too hard....I will sometimes lubricate them....Or replace the basket drive assy. You do know how to take the cabinet off i take it??

Oct 02, 2007 | Washing Machines

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

jimorris77

Level 3 Expert

411 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...