Question about GE 74801 Clock Radio

6 Answers

Resetting clock I need to know how to reset clock

Posted by on

  • 8 more comments 
  • Anonymous Feb 07, 2008

    LaCrosse Technology WS-8117U-IT-C my clock is 2 hours fast. I set it and it keeps going back to 2 hours fast?

  • lboogie2324 Feb 19, 2008

    How to reset the clock

  • eboo Mar 09, 2008

    can't reset to daylight savings

  • inverness Mar 23, 2008


  • LouToYou Apr 16, 2008

    I can't re-set the Timex T301B to the proper time zone even after trying all 7 zones. My clock doesn't seem to allow for DST in the Pacific NW. Please find a solution.

  • nhjohn Aug 25, 2008

    how do i set the time

  • Anonymous Nov 02, 2008

    can't reset clock

  • joycnathan Nov 02, 2008

    need to reset time

  • jslocumb72 Nov 03, 2008

    i need to know how to change the time on my clock.

  • metry1209 Dec 26, 2008

    i cannot set the time nor alarm - please help!!



6 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Press the SET button until you cycle through the alarms and the Colons on the time start to flash. use the right and left arrows from the CD buttons to adjust time; After time is set; press the SET button. Be careful to not fat finger and hit the CD button when pressing the SET buttons. That will turn on the AWFUL NAP timer. That's another headache.

Stop the Nap alarm Press NAP to start NAP flashing. Press and hold NAP to cancel the nap setting. If this does not work; try again. It seems to take me a time or 2 to get it to work.

Posted on Nov 07, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I've just realized that it seems complicated because we are used to seeing the numbers flash to indicate that we can change them; however, with this clock, it does not work that way.

Also, you do not need to hold the SET button down.

To set the CLOCK ...

Press SET three (3) times ... it will display the wrong time and the colon will flash - just press the FF or RR to set the time and you can press and hold down FF or RR to move ahead or back faster. Then press SET to store the new time. And you are done!

To set the ALARMS ...

Press SET once ... it will display wake 1 time and just press the FF or RR to set the time. Press either CANCEL once or SET 3 times to exit.

Press SET twice ... it will display wake 2 time and just press the FF or RR to set the time. Press either CANCEL once or SET 2 times to exit.

Enjoy your clock!

Posted on Sep 23, 2009


LouToYou adds:
To set your clock back 1 hour you must click the time change (up or down buttons) 60 times -- which is one hour.
EXAMPLE: The clock does not change from 3:46 to 2:46 without you pressing the Minutes button 60 times after the time started flashing. The minutes will change the hour to the next lower hour after you have "deducted" a full 60 minutes. Or, the minutes will increase the hour to the next higher hour if you add 60 minutes to your pre-set time. You add or deduct minutes to change the pre-set hour.

Posted on Apr 29, 2008

From LouToYou regarding the Timex T301B clock/radio/alarm: I wrote an email to the Timex company and they wrote back saying:
We apologize but there is no patch available. Consumers must change clocks.

Due to newly enacted government regulations, effective this year you must change the time manually, since the calendar was programmed to change according to the time DST issued by the government, it will not recognize the change after 2007. Now the time must be changed 4 times.

Press & hold the time set button until the time flash, then release it and press the ff >> or << rev buttons.

So, manually hold down the Time Set button until the time flashes (this takes some time -- mess around with it). Then use the up and down arrows just above the Time Set button to set the the clock to the correct time. Be sure to have the correct time zone set first. Hey, it worked for me!!!

Posted on Apr 29, 2008

How can i change the time on my bose awrcci, the time change i dont know how set up

Posted on Feb 04, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I found a solution to my Bose no feature for time adjustment: I wake up "earlier" one hour! This way, I am not in late for work for 1 hr! I wish they could have send the instructions with the machine...especially since they are not quite easy to replace financially speaking...

Posted on Apr 29, 2008

3 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: lost manual for Nexxtech motion clock. Need to reset

Try and look up the instructions on the internet. That may help a little.

Posted on Dec 29, 2008

  • 8596 Answers

SOURCE: Smart set alarm clock - resetting instruction

First, make sure the time is set correctly – Eastern Standard Time (EST) is the default
Press the Alarm Mode button – it has options for Weekend, meaning Sat and Sun only; Weekdays (Mon-Fri), and Everyday
While holding either the ALM 1 or ALM 2 button, press up or down to set the correct wake-up time
Release ALM 1 (or 2) when you are finished

Here is a link to the manual:

-Tha Mp3 Doctor

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you reset the time on the clock ?

I would need to know exact name and model of your controller?

Nov 06, 2017 | The Audio Players & Recorders

1 Answer

I want to know how to reset my clock in my 2005 Honda inspire car. the dash is all set out in Japanese.

Don't know your car but clock on a lot of cars is controlled by the other button near the odo reset - press and hold till clock flashes, these buttons are normally near speedo and rev counter normally ignition on engine off then sometimes your button turns left or right to adjust. Either that or search for images of your car and it's clock.

Jan 01, 2015 | Honda Cars & Trucks

1 Answer

Hotpoint oven bs43

you need to send the full model number,most likely you have a bad clock assy.even though your clock might work it comes with the clock and a computer board all together.i never heard of resetting a timer,i do know that if you unplug or shut down the power from the fuse box for 5 to 10 minutes sometimes resets the computer just like a regular house computer, it sounds like your loosing power and i don't think resetting anything is gonna help you,also make sure you have 240 volts going to the oven,but if the fan and light are not working and no heat it sounds like you have a bad clock assy.if it's in good shape and depending on the age you might want to call someone in to check it for you,if it is the clock assy. it might not be avalable anymore but there are companies that can rebuild the clock assy. you have.good luck with your oven.

Jul 10, 2013 | Ovens

1 Answer

How to troubleshoot a mother board

to trouble shoot motherboard you need to know basic of motherboard there are mainly three thing s for motherboard to work first voltage +12v +5v +3.3v the motherboard then needs clock and reset to start adreesing the lcok is produced by the 14.318Mhz crystel and restet is produced by 32 khz crystel when the power is on first the clock has to be present for the reset to function if the clock and reset and there and the adress line is not still working means the elecrolitic capcitors are fult the capacitors in motherboard have huge role to play they are ones prvent audiolines entering the adress lines

Jan 29, 2011 | ASUS M2N-MX Motherboard

2 Answers

How do i reset clock for the taylor clock timer 5851-21?

my Taylor 5851-21 has Hour Min Then under thatt Timer/Reset abd Start/Stop. How do I set the time. I know how to work the timer and reset the timer, but I need to set the clock. But it does not have a clock button label as you describe above.

Nov 20, 2009 | Taylor Hardware & Accessories

1 Answer

Easy one...93 Lincoln...need to know how to set the clock on the radio/cassette as well as the stations. Thanks in advance!

assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it

Nov 01, 2009 | 1993 Lincoln Town Car

4 Answers

Reset the service light on a vw touran 2005

Look in owners manual you can do this yourself very easily using ignition,milage reset button and clock reset button it's in the book cant remember which page

May 30, 2009 | 2005 Volkswagen Touareg

2 Answers

Lost manual for Nexxtech motion clock. Need to reset

You did not supply a model number and the Nexxtech web site has no information, however, I did track down the supplier, Orbyx
Just enter the info model number etc. and see what comes up.
This is the maker of the Clock.

Dec 18, 2008 | Emerson CKW2000 Clock Radio

1 Answer

Clock will not reset

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for maybe an hour. Then let us know if the hard reset does not fix it.

Your owner's manual will you tell you what the icons in the display mean.

Many Emerson microwave owner's manuals are available for free download here.

Even though yours may not be there, there might be one close enough to help you .

Once you've done a reset and checked your manual, if you still need help, let us know.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 11, 2008 | Microwave Ovens

1 Answer

Lamp clock reset

The only way to reset the lamp timer is with the LG programmer remote, however resetting the lamp timer does not affect the picture quality. If you need a part # for the remote let me know. Maybe you can find an auth. service center who will let you use the remote. If they do, simply power the unit up and when running hit the instart button on the programmer remote and after the menu comes on the screen simply hit the offstart button. The unit will shut of and when you power it again the lamp timer will be reset.

Nov 04, 2007 | LG RU-44SZ61 44" Rear Projection...

Not finding what you are looking for?
GE 74801 Clock Radio Logo

3,233 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Audio Players & Recorders Experts


Level 3 Expert

13434 Answers


Level 1 Expert

33 Answers

Rob Hill
Rob Hill

Level 3 Expert

1377 Answers

Are you a GE Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides