Question about Avanti EWC-12 Wine Cooler
Avanti sent me a new circuit board to replace that one that failed but they did not send instructions on where to solder the wires to the board. I can see where the red and black wires will go but am unsure of where the green and yellow wire is to be soldered. The board is a HYS60-12-KD V-0 130C. Any help you can provide will be greatly appreciated.
The colors of the wires were incorrectly stated on the last post. The red and black (power) wires were listed as red and white. The green and yellow wire was listed as two wires, green and white. It is actually only one wire that is green and yellow.
The green an yellow wire is a ground. Look for an area on the board with a ground symbol . Can you not match the location from the old board???
Either way the black and red are your positive and negative power, while the third is the ground. The wire probably are located in close proximity to each other.
Let me know if this helps
Posted on Jan 16, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 26, 2013 | Avanti Exercise & Fitness
Oct 24, 2012 | Avanti EWC16B Thermoelectric Wine Cooler...
Oct 20, 2010 | Avanti EWC-12 Wine Cooler
Jun 04, 2009 | Avanti WCR683DZD Stainless Steel Wine...
May 29, 2008 | Avanti Refrigerators
Apr 17, 2008 | Nikon Speedlight SB-800 TTL Flash
1,963 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: