Question about Kenmore Dryers
Hi, Sounds like the belt broke.
UNPLUG the dryer. This model you need to remove the two screws under the lint screen. Now use a flat blade screw drive and insert it in the gap between the top and the front panel and pry the top up. Now locate and remove the screws on the inside of the front panel in upper corners. The front should lift off.
There should be instructions that came with the belt. I will try and explain how this goes on. The idler pulley fits in a slot right in front of the motor. Put the belt over the drum with ribs touching drum. Now, thread the belt through the idler pulley wheel and bracket and set the belt on the motor pulley. The ribs should rest in the grooves on the motor pulley.
I hope this helps you. If I can assist you further, please let me know. Please rate me performance so that others as well as myself will know how I am doing.
Posted on Feb 12, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 03, 2014 | Kenmore Series 80 Creme Front Gas Dryer...
Mar 02, 2013 | Kenmore Dryers
Dec 01, 2012 | Kenmore Dryers
Jul 14, 2012 | Kenmore 24032\24036 Top Load Washer
Jul 30, 2011 | Kenmore 800 6983 Electric Dryer
Feb 04, 2010 | Dryers
Aug 26, 2009 | Kenmore 73952 Gas Dryer
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: