Question about Krups Coffee Makers & Espresso Machines

2 Answers

I have a Krups type 964 espresso maker - I can't get a good seal

I have a Krups type 964 espresso maker. It's at least 10 years old and has always worked like a charm. Recently, however, no matter what adjustments I make - less coffee, more coffee, tighter fastening of the coffee thing - at some point during the pulling of the shot, coffee and steam ends up running out the sides, or shooting out the sides sometimes. I have cleaned the area - including the threading - several times, nothing helps. Recently it got so bad that it more or less became super pressurized, no espresso came out, and it felt as if the machine was on the verge of exploding. What's the deal?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The seal on the filter is broken? its a replacement part

Posted on Jun 23, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try removing the screw that holds the metal filter in place, and remove the filter plate. Then clean the accumulated coffee dust inside. Once clean, reassemble and all should work fine. I have to do this every 6 months or so once the machine got to be about 12 years old.

Posted on Feb 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Krups model 964


Be aware that any parts you are likely to need are obsolete and have been for years. A very good simple coffeemaker that they should still be making instead of a lot of the current overpriced over complicated and over sized machines they want us to buy today. There machines were sold under very many brands and all of them have gone obsolete for parts now.

Jan 06, 2014 | Krups Coffee Makers & Espresso Machines

1 Answer

I have the Krups 964 espresso maker; it is about 10 years old. Recently it began to pour water out and around the coffee basket holder at a fast pace, and it does not make expresso. I did remove the...


I don't know much about this unit, but there might be a rubber seal in head where the porta filter locks in to. It is possible that this seal is either damaged or just corrupted with grounds. Try cleaning it out and or checking the seal for damage.

Sep 10, 2011 | Coffee Makers & Espresso Machines

2 Answers

Espresso function problem Krups XP2070


Most likely it starts the espresso but stops after a few second because the unit is not getting the water flow information or the unit is blocked. You will know that you have a blockage because not water will come out of the espresso filter but most likely you get some liquid during the 4-10 seconds it operates. My unit has the same problem and I fixed by getting a new flow meter. This unit is installed after the water tank and has wires (3) going to the the power module.

Nov 02, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

2 Answers

I have an old expresso maker Krups type 963 and need instructions


Be advise on the recall of Krups. Just a sticker. Operation is fine.

http://www.cpsc.gov/cpscpub/prerel/prhtml95/95051.html

Dec 26, 2008 | Krups Small Appliances Espresso Machine

1 Answer

Need instructions for a Krups Household Coffee/Espresso Maker


Go o krupsusa.com and click on "instructions" they should have it

Dec 11, 2008 | Krups Small Appliances Espresso Machine

1 Answer

Leaking from the water Chamber


The Krups heats the water through a horseshoe shaped aluminum tube which the heating element is wrapped around the tube in the same fashion, the tube is corroded or cracked most likely, if you poured cold water into the machine when it was hot, this will crack the tube, they are made by Cesod ? which is stamped on the element with a number on it,  and I have seen between 700 and 1100 watt elements. I have the same problem with my 7 year old krups coffee maker, Im trying to repair the tube with aluminum welding or find a new element.  It could also be the high temp tubing may be cracked.  You need tamper proof Torx bits to remove the bottom cover on some models.

Jan 21, 2008 | Krups Caffe Bistro 867 Espresso & Coffee...

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

1,471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Ray Murphy

Level 2 Expert

68 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...