Question about Integra DTR-5.1 Receiver

2 Answers

The reciver dosnt get a signal from the hdmi inputs both ps3 and blu ray have the same problem it is a dtr 5.9 integra

Posted by on

  • Anonymous Mar 01, 2010

    if you set the ps3 to the lowest res it will sync if you try to test other res at first it shows a blank screen and the message of no signal then if you try later it works also there is no on screen display with the set up menus on the amp the output is through hdmi as well i have cheaked thet the cables are good by bypassing the reciver and every thing gos as it should

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

HAVING THE SAME PROBLEM. omg. maybe there is help. will get audio but no video from DPS dvd player and PS3. no onscreen menu either. changed hdmi cord. seems to be problem with reciever. DVD works fine when changing to component cables instead of the HDMI. sometimes plugging and unplugging the HDMI cable gets the PS3 working. Don't quite understand scrap605's suggestion. but that doesn't solve this prob.

Posted on Mar 07, 2010

Ad

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

What you should do is make sure that your HDMI is cord is not in an awkard position, which like mine i have to unplug and plug back in to get a signal

Posted on Mar 01, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"handshake" between DTR 5.9 and an LG Blu-ray player


You will have a defective processor pcb. You may want to see if you can get Integra to give you a one time repair on this.

Mar 26, 2014 | Integra Onkyo Rc-711m Dtr-4.9 / 5.9...

1 Answer

How do I set up an Integra DTR 7.8 for 3D display and audio


Your DTR-7.8 receiver is not 3D compatible. It does not support the new 1.4 HDMI. You have to have 1.4 HDMI and 1.4 cables for the 3D format.

You can bypass your receiver for the video though. Simply run your HDMI cord (1.4) from your Blue Ray to your Projector. Your audio can be ran from your Blue ray to your reciever.

May 17, 2012 | Integra Audio Players & Recorders

3 Answers

How do I connect my PS3 to my sanyo dp50747 in hdmi? I have everything hooked up correctly, but its not coming up on the TV. What do I do?????


If you see a no signal message, then it means that the signal output format of the PS3 does not match . It happens if you have previous used it on another tv and now connected it to a different tv. To resolve this, turn off the PS3 . Press and hold the power button on the PS3 till you hear three BEEPS. The PS3 should automatically detect the tv's resolution and the initial setup screen should appear. After that you should just follow on-screen instructions to set it up.

Sep 26, 2011 | Sanyo DP50747 50 in. Plasma TV

2 Answers

I have a Playstation 3/blu ray player and I don't know how to get hi def video on a samsung hln467w


Your TV only has a DVI input, not an HDMI which PS3 has as an output. You can buy a HDMI to DVI adapter and connect the HDMI out of the PS3 to the DVI input of the TV. To get the true HighDef video you need a HDMI input on the TV to enjoy the full capacity of the Blu ray capabilities of the PS3. DVI came out before the HDMI standard and your picture will look good but not like HDMI. I have the same problem with my samsung 65 inch. I Bought the wrong technology. I hope this helps and good luck!
83c442d.png

Nov 07, 2009 | Samsung HLN467W 46" Rear Projection HDTV

1 Answer

PS3 not working on 42'' JVC via HDMI cable port


I have the PS3 and this TV and it works....Try this.

1. Turn ON TV
2. Connect HDMI from TV to PS3
3. Select the correct HDMI input on the TV for the PS3(important)
4.Turn OFF PS3 if it is ON.
5. hold [I/O] Power button on PS3
6. Wait about 5 second and you should get the "HDMI Detected" or some similar message.
7. Configure the HDMI output for the PS3

Also, If you set the PS3 to "auto" for hdmi, it may set the resolution to 1080i. You may want to deselect everthing but the 1080P.

Mar 24, 2009 | Sony Playstation 3 40GB System Console

1 Answer

No sound from speakers from components with Integra 6.9 receiver


Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.

Jan 17, 2009 | Integra DTR-9.1 7.1 Channels Receiver

1 Answer

Sharp Aquos 37" Audio Static Issue when watching DVDs


i have had to replace the hdmi input board on these units to fix them.

Jan 08, 2009 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

5 Answers

NO SURROUND SOUND WHEN PLAYING BLU-RAY


Your amplifier should "downgrade" the signal to 5.1, even if the disc isn't using it. It is most likely a setting on your amp that may need adjusting for "types" of digital to accept on its input. If you can, set your optical input on your amp to "auto". This way it will automatically detect and switch for the proper incoming audio feed

Jan 01, 2008 | Sony Playstation 3 (PS3) Console

3 Answers

Playstation 3 audio connection into Yamaha HTR-6040 AV Receiver


Is Yamaha HTR-640 a receiver? Try HDMI from PS3 to receiver or Sony HDTV. If HDMI from PS3 to receiver the you need and HDMI from receiver to out Sony HDTV. You could connect everything to receiver and HDMI out to HDTV. You can not have an HDMI cable AND an optical cable coming out of the PS3, only one or the other.

Dec 30, 2007 | Yamaha HTR-6130 Receiver

2 Answers

Hdmi


I can't be exactly sure without more information, but it sounds like you ps3 is outputting from another port. My ps3 originally was outputting from the component/composite cable port so in order to use the hdmi output I had to do a soft reset. That makes the ps3 sense what cable is plugged into it and automatically output through that port instead of using whatever is the saved setting.

With your ps3 turned on hold down the power button for a few second until it beeps and flashes 3 times (should be about 5 seconds). You might have to try it a few times to get it to work, but you should get picture and be able to adjust the settings on the ps3.

Dec 08, 2007 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Integra DTR-5.1 Receiver Logo

Related Topics:

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...