Question about Estate TGDX640JQ Gas Dryer

1 Answer

Dryer wont stay on when i release the start button

Estate model tgdx640jq2, wont stay running after i release the start button. If I hold it in the drum seems to be dragging. I do not see anything wedged in there at all.I took the back panel off and all the safeties in the back have continuity. There is one that has 4 wires going to it, 2 red and 2 purple i believe, 2 of those have no continuity but the other 2 have. I did not pull any thing else off, just the back panel.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 256 Answers

You may have an issue with the motor. Contact an appliance service company.

Posted on Apr 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why want this dryer stay on ?


you have a bad belt switch,if the dryer stays running while you hold the start button on and stops when you release the button its the belt switch part WD21X10261 i've seen this a few times,go here and look at part 803 this is the bad part.
www.searspartsdirect.com/model-number/DPXR473EW0WW/0432/0151200.html

Oct 03, 2017 | GE Dryers

1 Answer

Maytag performance dryer model PYE2300AYW won't stay running after releasing the start button


Maytag Dryer Won't Start - Testing the Start Button - YouTube

? 1:26
https://www.youtube.com/watch?v=gJwYV8HkTbk
Oct 7, 2013 - Uploaded by Bill Newberry
This video shows you how to test the start button on a MaytagDryer. ... dryer medc200xw0 will not keep running after releasing the start button.

GE Dryer won't stay on after turnin



Dryer won't continue running when start button released ...

forum.appliancepartspros.com > Appliance Repair Help > Dryer Repair

Jul 25, 2014 - 3 posts - ‎2 authors
When I push and hold the start button the dryer motor starts and heats. It will not continue to run when I release the button. All thermostats ... button released. Model Number: PYET344AYW Brand: Maytag Age: 5 - 10 years .... Check for 120vac on the purple wire at motor after releasing start button. If it goes ... GE Dryer will not stay running when start button released ...
2 posts
Jul 26, 2014
Starts but won't stay running
6 posts
Sep 12, 2013
Dryer won't stay running
2 posts
Apr 23, 2011
Dryer will not stay running
10 posts
Jan 11, 2011
More results from forum.appliancepartspros.com

Jan 01, 2016 | Maytag Dryers

1 Answer

I have a whirlpool duet gas dryer model ggw9200lw1. when i press the start button it clicks once but wont run.


First, check the door switch. Push and release it by hand and you should hear a click. If no sound, replace the door switch with this part.
If the switch is ok, press the cancel button on the machine. Then do this. press and hold the start button for 2 seconds then release wait 2 seconds and press and hold again for 2 seconds continue this pattern until the dryer goes into test mode. You will see all the lights on the control light up. press each button on the control one at a time 3 times each. (Do not press the cancel button) until the dryer begins to run. When the dryer starts to run then press the cancel button. Then your machine should function properly.

Oct 19, 2012 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

Dryer will not stay running


Hi,
There can be many reasons why your dryer2_bing.gif will not turn...

This tip that I wrote will help you to figure out what is happening...

Dryer2_bing.gif Repair - The Dryer2_bing.gif is not Turning
http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

Dryer2_bing.gif Repair ? The dryer will not start
http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start


heatman101

May 10, 2010 | Kenmore 63942 Dryer

1 Answer

Dryer will not stay running


CHECK THERMAL FUSE #3392519 @ $15.00...RDS

Apr 21, 2010 | Kenmore 63942 Dryer

1 Answer

Kenmore gas dryer doesn't stay on


I think it is probally the thermocouple not holding letting gas valve work properly, timers do not go out very often, its not getting hot enough to release the gas, valve wont let it, chheck thermocouple, let me know im not there, but its in the heat not getting hot enough

Feb 25, 2010 | Kenmore Dryers

1 Answer

Dryer wont stay running


Chances are the motor switch is stuck (most likely)or the motor run circuit has failed (least likely but possible).
Disconnect unit from power and expose motor for thorough cleaning. Clean centrifigual switch sliding mechanism on motor shaft. It should move one direction under spring tension and spring back when released. Re-assemble and test.

Jun 12, 2009 | Dryers

1 Answer

Nothing happens when I push the start button on my Gas Dryer


Three things you can check the door switch is it clicking? The thermal fuse you want to make sure there is continuity or worse case would be your motor.

Apr 02, 2009 | Whirlpool LGV4634JQ Gas Dryer

1 Answer

Dryer starts when start button is pressed and held but will not stay running when button is released


there is a holding contact at the motor wiring, check the schematics and trace that holding contact. it should hold the motor running as soon as it starts.

tnx 4 using fixya,

drcool

Sep 14, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Dryer won't stay running


the centrifical switch on the main motor is not engageing you can take the dryer apart and clean it its on the motor shaft where the pully is but some times you have to replace the motor if the run windings are bad

Jun 17, 2008 | Estate TEDX640JQ Electric Dryer

Not finding what you are looking for?
Estate TGDX640JQ Gas Dryer Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Estate Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Mike

Level 3 Expert

4363 Answers

jimorris77

Level 3 Expert

411 Answers

Are you an Estate Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...