Question about Minolta bizhub 200 All-In-One Printer
My bizhub 200 is displaying an error code of C0202. It says malfunction detected. Any ideas what it may be?
I fix the error thanks to Patrillica on my BIZHUB 350!
The paper stock in tray 1 or to be exact above the tray 1, when you open it, you can hardly see it. After you remove the paper you should unplug your machine and then lug it back.
Thanks again to Patrillica.
Posted on Jun 05, 2008
This is what you need to do: take all the paper out from trays 1 and 2, opened up both trays all the way, you have to really get down (I was on my knees in my $700 suit - LOL) so you can see the back inside panel and only then you could see the stock paper. I took it out with a broom, unpluged the machine, waited 5 minutes and now it works fine. Good luck
Posted on Aug 09, 2008
Bizhub 163, it was showing maintanence 2
Posted on May 13, 2009
This is a TRAY 1 elevation failure...To reset : open and close the front door.
You may have a paper stuck in the back off the tray.
Check if you don't have a broken sensor...
Posted on Mar 30, 2008
Thanks to FixYa I was able to fix this problem in less than 5 minutes. I pulled the top drawer tray out (paper was empty) and left it open. Turned off and unplugged the machine (hard-boot). Pushed the tray in, plugged in and it worked just fine. thanks for this great service!
Posted on Nov 03, 2008
Yes, is a paper stuck in tray 1.
Posted on Sep 11, 2008
At our company we couldn't manage with a long stick, so we tilted the entire printer (it's heavy, takes 2 people) and pulled the paper out from underneath. It worked.
Posted on Aug 27, 2008
I have that problem now and the problem is the bushing at the back of the lifter shaft is broken and slips out of the slot in the paper cassette creating slack. Check bushing at rear by drive pin
Posted on Aug 27, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 15, 2017 | Konica Minolta Office Equipment & Supplies
Feb 05, 2014 | Konica Minolta Bizhub C353 Copier
May 11, 2013 | Minolta bizhub 200 Copier
Feb 11, 2013 | Minolta bizhub 200 All-In-One Printer
Sep 18, 2010 | Konica Minolta Bizhub 362 Copier
Nov 29, 2009 | Konica Minolta bizhub 350 All-In-One Laser...
17,860 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: