Question about LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Trouble removing the macerator from a lg lds5811ww for cleaning. Want to make certain no foreign objects stopping blade.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

After removing lower rack and then the spray arm (pulling directly up and out), remove the (approximately) 12 silver screws from around the guard. Lift out to gain access to the lowest sump area.
Watch out for broken glass down there, it is sometimes almost invisible... and sharp!

Posted on May 21, 2010

  • Phil Dec 31, 2012

    After reading your post I decided to tackle the noisy whirring that had started coming from my LG dishwasher. I got all the way down to the lower sump area and found some broken glass, a little rock, and a broken drill bit. I can account for the glass and maybe even the little pebble, but the broken drill bit is a mystery. Judging from the rust on the bit, I'd say it has been there a long time. My guess is it came from the factory or from the installers that installed our DW. Anyway, the whirring is gone, so I'm glad I went in there, your post gave me the boost I needed to take this on confidently. Thanks.

  • Jeff Meyer Dec 31, 2012

    I'm happy my experience helped you out. Based on my experience, this will not be the last time you open up the lower sump area. If/When the odd, rythimic noise returns, you know what to do. Good Luck.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lg lds5811ww isn't pumping water out after its thru washing


The drain pump seems to be faulty, open the pump filter tray and make sure that the impeller is not caught up by some foreign object that is preventing it from turning. You might need to replace the pump.

May 16, 2015 | LG Washing Machines

1 Answer

Thermostat? LG Dishwasher Model: LDS5811WW


Hello Anonymous...

You hit on the reason ($$$$) I come here to contribute... Times are hard, money is scares... and my darling inhabitants are hurting...

Sometimes I can help not throw away a nearly perfect
(and faithful) appliance ... The ULTIMATE in recycling...
((Good for all of us... "inhabitants" (EARTH will be fine)).

((If you have ever seen our home from space...
It's a really pretty place. I'm not so worried for the place...
But there's a CERTAIN magic with these inhabitants...
If we pull together... It will be quite REWARDING)).

So...Thank you for ASKING.

I have a FREE manuals site where I start to read your
owner's manual... Better still... The Manufacturer also
prints "SERVICE MANUALS"...
several are shown... (don't go there yet)
ManualsLib Makes it easy to find manuals online

So being a MORE is BETTER GUY... I chose the one
that occupies the most memory....
and ran through the index 'til we got to trouble codes...

We are starting where your (pretty clever) sweetums found his
CODE clues... and we are going to look backwards..
To find "Thermostat"... (Found "thermistor").

Even if I am WRONG... You will now remember the secret handshake...& always know of the "MAGIC" of errors codes..
(which begin on your FREE page 36...

Although there is another "thermistor" error...
It is an over heat condition.. but it all for the entire PCB (printed control board) to be replaced
LG Dishwasher Main Control Board 6871DD1006Q

Code looks like an EE
with the top bar missing from the first "E"
(making it an inverted "F" (an important difference)...


~~

We are going with ""HE""

HE"(symptom: water is not being heated)
Code yields...
>> HEATER ERROR... (check/replace "thermistor")
LDS5811WW (et al): >> (click here))...
LG DF6810WW Service Manual Page 36

This enables us to search on-line parts houses,
(everybody sells pretty much the same parts... $$, Services & guaranteed fits are different ... (My personal experience SEARS folks a rude, pushy, abusive but make up for all that by their higher than average prices... (I used to be a KENMORE fan))...

SEARS says.. the code is "tE"...

and further states the control board must be replaced

Now I use appliancepartspros, partselect, repairclinic (etc.)...
Sites (with VIDEOS) that respond to an internet search on
"LDS5811WW + thermister"

No "THERMISTER" parts found
Search Over 2 1 Million Appliance Parts

Sadly... Henry (SEARS) says the "thermister" is an integrated part of the HEATER... further adding "the part may be returned if it does not fix your trouble $54.03...ish
(SEARS = guaranteed fit).

Dishwasher Heating Element Part Number 5301DD1001A Sears PartsDirect

http://www.searspartsdirect.com/part-number/5301DD1001A/0022/722.html?modelNumber=LDS5811WW&categoryName=Dishwasher&brandName=LG

I am going to direct your reading to SEARs...

How to Replace Dishwasher Electronic Control Board Repair Guide Help Sears... Pictorial job description:

But do compare prices... and Happy hunting

Carnac the Magnificent

Jul 25, 2017 | LG 24 in. LD-12BW5 Free-standing...

1 Answer

Lg lds5811ww impeller stuck on


USE AN AUTOMOTIVE TYPE GEAR OR SPROCKET PULLING TOOL

Jul 30, 2012 | LG Dishwashers

1 Answer

LG DISHWASHER LDS5811WW HAS ERROR CODE LE.WHAT PART DO I NEED?


check for broken wires... if still cant find the problem take motor off and spin the shaft. if there is resistance then you need a new motor

Aug 08, 2010 | LG 24 in. LD-12BW5 Free-standing...

1 Answer

We have an LG lds5811ww dishwasher with IE error


check for voltage at the water valve when it should be filling Try disconnecting the Water Valve outlet from the DishWasher and run the output into a bucket if all is well with the valve then remove the door panel and inspect the wires near the bottom of the door. the wires get buried in the tar like insulation causing the wires to break as the door is opened and closed.That tar like substance is one of the worst things they could of ever put into that machine causes the wires to break apart adn become brittle

Apr 30, 2010 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Water leaking from dishwasher lg model lds5811ww


The drain line is clean. Have you checked to make sure the the rest of the drain is clear all the way down to the main drain?. Also check the pump to make sure that it is working properly, it might be pumping water in, but it may not be wanting to pump the water out

Feb 11, 2009 | LG 24 in. LDS 5811ST Stainless Steel...

1 Answer

Dishwasher


The LE code indicates motor failure (or intermittent problem with motor). Based on what Ive read their support sucks, so sory to be bearer of bad news...

Nov 01, 2008 | LG 24 in. LDS 5811 Built-in Dishwasher

Not finding what you are looking for?
LG 24 in. LDS 5811 Built-in Dishwasher Logo

Related Topics:

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Mike

Level 3 Expert

4359 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...