Question about Sharp Aquos LC-46D62U 46 in. LCD HDTV
Hi. I have a sharp aquos 46d62u, and recently, when turned on, the sound works, but there is no picture. This problem affects all inputs. The first time it happened, we left the TV off and unplugged all day, and it still wouldn't work until after that we tryed pulling the HDMI's out and re-plugging them, and the problem seemed fixed. This time, however, unplugging and replugging isn't working. The audio is just fine, but there's no picture what-so-ever. Maybe someone knows what's wrong and how to fix it?
We have the same problem with our 32" Aquos. Turn on the TV and after a couple seconds the picture goes out but still have audio. So this solution doesn't permanently fix the problem, but it works instantly to get the picture back. With the TV turned off, tap the side of the set twice with the palm of your hand. Turn the TV back on, and VOILA, you have a picture. I know the last thing you think to do is to hit your TV to fix it, but that is often how my husband tries to fix things...this time it worked!!
Posted on Aug 16, 2009
Hello to all who have posted Aquos TV sound but no picture. I had the same prob and for weeks found different ways to get it to work but, finally all solutions failed and it was a trip to sharp (reason I had not done it previously was TV bought in Germany and now live in Italy but warranty honoured). I believe from the amount of Aquos TVs in the repair shop and the fact that the guy said come back in 2 days he knew exactly what the fault was and therefore think sharp should be recalling all the TVs to sort the problem out! I am sorry for the people whose warranties have ran out. My TV started playing up after only 14 months.
Posted on Oct 10, 2008
Use component cables (red,green, blue) for picture instead of HDMI. Then also use a form of audio cable also, as the component cables will pass HD picture but no sound.
Posted on May 30, 2008
Sharp aquos 32 inch tv in It would work and then picture will go to snow and no inputs worked, the remote didn't even work! I would have to power everything down
Posted on Jul 13, 2013
Dont buy any more of their products. ever!
Posted on Nov 28, 2012
THE TV NEEDS THE CONTROL BOARD CONNECTED DIRECTLY TO THE PANEL ITSELF SUPOSEDLY COSTING 200 DOLLARS OR MORE
Posted on Jun 10, 2009
Call Sharp at 1-800-237-4277. There may be a firmware update to fix this issue. Good Luck!
Posted on Oct 07, 2009
Hi i have had the same problem there is a micro chip on the tuner board that is at fault the chip is difficult to replace as it is surface mounted and the chip itself is expensive i solved the problem by changing all the tuner board i replaced the board for £35 from ebay
Posted on Sep 23, 2009
I unplugged the HDMI cable. Plugged in Red, Yellow and White patch cords to TV input #3, then plugged other end of Patch cords to Red, Yellow, White connector on cable box. TV works great. Got sound and Great picture back
Posted on Mar 14, 2017
I can't find the gentlemens name that posted this already but I can tell you that his solution was correct. I did mine just a little differently.
1. First take all the screws holding the entire back panel out with a small Phillips screwdriver.
2. Remove the entire cover.
3. The board that is directly behind the hdmi inputs has five screws in it. Loosen them all but don't remove them and push the metal trim that's around the board away from the board to where there is a small bit of separation from the metal trim and the board and retighten the screws.
4. Double check that it has a gap on all sides and replace the back cover of the tv. It is a very easy process and not at all as intimidating as it seems.
Posted on Dec 08, 2016
I HAVE THE SOLUTION!!!! My 52" was doing the same thing. It would work and then picture will go to snow and no inputs worked, the remote didn't even work! I would have to power everything down (Reciever, PS3, etc.) then it would work but no telling how long. Even touching the TV where the buttons are made it go to snow!! THIS IS WHAT YOU DO. Take the back cover off. Where the side buttons are, there is a board in there and it is touching the metal frame. Take something like a credit card and cut it enough so that it will not be sticking out, get some electrical tape and anchor the card to the metal frame so it will not fall out of place. You're basically protecting the board from touching the frame!! Put the back side back on and screw in place and your all set. My TV has been working perfectly ever since.
Posted on Jun 24, 2013
I had the same issue...great picture but NO sound. I unplugged the TV for 10 minutes, plugged it back in, and shazam! sound again!
Is this an ongoing issue with the Sharp LCD?
Posted on Aug 28, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Sep 24, 2015 | Sharp Aquos Televison & Video
Jun 11, 2012 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Jun 08, 2017 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
May 06, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Jan 10, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Dec 28, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Apr 26, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Apr 21, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
33,930 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: