Question about Stanley Fatmax Xtreme Retractable Utility Knife
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If you use the wrong brand of blades, they won't let the knife shut all the way. The notch is cut slightly differently. The same is true for the Kobalt knife I just bought at Lowes. Get the Stanley blades that are right next to the knives - they are the only ones that work.
If you bought the Stanley blades, then I don't know what the problem is. Sorry for that too.
Posted on Nov 20, 2009
1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.
If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.
make sure both notches of the blade are inside the handle. They notch into the thumb lever.
Posted on Apr 11, 2010
Testimonial: "Thanks so much!"
SOURCE: How do you load a new blade?
At the back end of the knive (the curved end) press the black piece through the yellow rounded part and the yellow front and the black back will part, now slide the yellow part back to reviel the blade folder. Fit new blade then refit the yellow part on top of the black part and slide the yellow part foward to lock it back in.
Posted on Jul 31, 2010
I can't see what country you live in from your profile, but if it's the UK, you could try www.partmaster.co.uk . They sell parts for just about anything.
Posted on Feb 28, 2011
Tips for a great answer:
Jan 27, 2014 | Stanley Cutter Tools
Aug 21, 2011 | Stanley Utility Knife
Jun 26, 2011 | Stanley Utility Knife
Apr 21, 2011 | Stanley Utility Knife
Dec 23, 2010 | Stanley Fatmax Xtreme Retractable Utility...
Nov 26, 2010 | Stanley Garden
Nov 07, 2010 | Stanley Utility Knife
Oct 21, 2010 | Garden
You do not have to remove any screws. Extend the blade outward
using the thumb slide on top of the knife. There is a small black pushbutton on
the opposite side from the lock button. Depress the button on the side and
using the other hand, grab the blade with your thumb and forefinger to pull the
blade out. It may require a little wiggling. Now the new blade can be slide in
and locked into place. The black pushbutton controls the locking mechanism that
keeps the blade from pulling out.
Aug 07, 2010 | Stanley Utility Knife
Nov 20, 2009 | Stanley Swivel - Lock Fixed - Blade...
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: