Question about Andis Styliner SLII Hair Trimmer

Open Question

My styliner ii trimmer is not cuttin even after i

My Andis styliner ii trimmer is not cutting even after i replaced cutting t-blade I dont know what i am doing wrong or if there is a problem with the clipper need help

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

heidi muehlenberg

  • 62 Answers

SOURCE: Andis Outliner II Trimmers

If you've been oiling the blades and have also put a new blade on them it may be an internal adjustment that needs to be corrected. Please send your trimmer to the Andis factory for repairs at 1800 Renaissance Blvd Sturtevant WI 53177. Please include a short note stating the problem as well as your name and address inside the box.

Thank you for purchasing Andis.

Posted on Jan 08, 2008

Ad

heidi muehlenberg

  • 62 Answers

SOURCE: my andis clippers are experiencing

Have you kept the blades oiled well both before and after every use? If so then the next step would be to send the unit in for repair. Please call the Andis customer service department at 1-80-558-9441 to either find a repair station in your state or to get the factory address.

Thank you for choosing Andis.

Posted on Nov 13, 2008

Anonymous

  • 2 Answers

SOURCE: i took apart the blades of my Andis Styliner II

GET A ******* LIFE AND A NEW BARBER *****

Posted on Jul 12, 2009

Anonymous

  • 2 Answers

SOURCE: My Blades won't move.

GET MONEY MONKEY DAT IT

Posted on Jul 12, 2009

Anonymous

  • 1 Answer

SOURCE: My GTO model Andis clippers

YOU HAVE TO OPEN DEM UP. TAKE OUT THE SCREWS ON THE TOP DEN TAKE OFF THE BLADE. ONCE YOU HAVE THE BLADE OUT THERE ARE TWO MORE LIL SCREWS UNSCREW THOSE (NOT ALL THE WAY OFF, JUST ENOUGH SO THAT THE BLADE WILL MOVE) ADJUST THE BLADE HOWEVER YOU WANT. IF YOU WANT IT CLOSE FOR A MORE DETAILED CLOSE LINE (NOT TO CLOSE AS DEY WILL CUT YOUR OR THE CLIENTS SKIN). YOU MUST TRY THEM OUT ON YOURSELF SEE IF THEY ARE TOO SHARP, IF THEY ARE TAKE THEM OFF AND ADJUST THEM AGAIN. EASIEST THING TOO DO IS USE A MIRROR, HOLD THE BLADE AGAINST THE MIRROR DEN MOVE IT AT AN 45 ANGLE DEN TIGHTEN THE SCREWS DER (BARBER TRICK).

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

5 Answers

Brand new andis trimmer pulling hair and not cutting good


The questions about Andis T-Outliner or Andis Styliner II, about not cutting or pulling hair.
On the Andis T-Outliner trimmer if the sharpness of the blade is worn out, all the tricks and treats won't make this blade to cut hair. Before I do any kind of work to the trimmer, I first test the coil for the right amount power, I can get out of the coil, without this power, it doesn't matter how new or old the trimmer is, the trimmer will not cut hair at all. If the coil is good, I will sharpen the blade and set it according to your needs (lineups or shave setting) after the blade is sharpened and set. The trimmer will need to be, adjusted for alignment to the blade, adjust the power of the coil, and adjust the tension for the blade. All these factors are involved in the Andis T-Outliner to cut hair clean especially lineups or shaving. These adjustments work together for the trimmer to work properly. I know that we all trying to save money, which is part of life, but sometimes frustration will take over and say hell with it, I'll buy another or forget it. Manufactures make mistakes, sometimes the trimmer was not sharpened or adjusted correctly. Any case, what I'm trying to say here, if you try all the tricks & treats and can get your trimmer to work, it may be easier for you to send it to a professional to sharpen & repair the problem and set the blade according to your needs (lineups or shave setting) We specialize on Andis T-Outliner Trimmers. Our complete sharpening & repair service is $19.99 each trimmer, this includes return shipping. We sharpen the blade, adjust and set the blade according to your request (Lineup or Shave setting) make all the necessary adjustments for alignment, power, tension to make your trimmer work better than new. Our mail order service is one day turn around. We are well known throughout the United States for our service in sharpening. Check us out at www.mannys-sharpening.com or call us at 323 237-2885. Service You Can Trust Since 1990. Manny Mobile Sharpening and Clipper Parts Supplies

Nov 26, 2013 | Andis T-Outliner Hair Trimmer

1 Answer

Andis Styliner 2 is not cutting it slightly pulls the hair


This styliner is crapt. I buy new clipper, right out of the box it doesn't cut, put a new blade on it, same thing. It doesn't matter how you adjust the blade, it does not give sharp line, and hard to do shape up. Andis Sucks.

Nov 13, 2012 | Andis Styliner SLII Hair Trimmer

2 Answers

I have an Andis outliner II I purchased a year ago. I recently changed the blade but it won't cut my hair. Do you kow why?


Sometimes the new blades from Andis are not sharpen enough to get that clean cut. also all trimmers need to be readjusted for power and alignment, plus sharpening the blade, it look like you need a complete sharpen & service on your Andis trimmer. check out Manny's Sharpening they have a Mail Order service, the service they provide is fast and they will sharpen make all the adjustment and give your trimmer more power and the blade will cut clean. They will even adjust the blade at your request on how you want that blade to be set at. Line Ups or Fade Cuts and even shave set. Manny's Sharpening been around for over 20 years and they have a very good rating on the net. Check it out Manny's Sharpening

May 21, 2011 | Andis Outliner II Hair Trimmer

4 Answers

Andis trimmers are making loud noise when used outside US


First off all when buying a step down transformer for these clippers or any other electrical equitment make sure u read the label check cycle 50/60 ,and watt transformer need to be the same are close enough,with is hard to get on tha market,get it made custom,I'm a barber and we have a little trick open your andis clipper ,get spong cut it neatly just a bit thicker than the space between movin part and amateur (coil) insert spong between,not centre bit top bit to blade that's where knocking comin from it can cause that movin bit to break,trim spong until u get it quit but able to cut ,note blade will get hot because of wrong transformer and can damage coil

Nov 01, 2009 | Andis Styliner SLII Hair Trimmer

1 Answer

How do i get blades closer on the pivot pro t liners


You really can't move the cutting edge on any andis trimmer blades without throwing them out of spec. I say this to say that if you try (and the blades are not precisely set) it will scrape and cut the skin when you attempt to use them. They are factory set for optimum cutting. If you have found that they aren't cutting as closely or as cleanly lately, it just might be time to replace the blade entirely. I have a set of those, and a styliner II, but I prefer the cutting power of my T-Outliner over all.

Oct 04, 2009 | Andis T-Outliner Hair Trimmer

3 Answers

It keeps geting hot every time i cut my hair


you should put clipper oil where the blade contacts it's base (near the middle of the base) and spray kool lube or a similar product on the cutting edge.

Aug 08, 2009 | Andis T-Outliner Hair Trimmer

1 Answer

Replaced with new blades, and now not cutting


 The protective film is still on the blades.( spray with clipper cleaner while running the clippers) Or there's a hair between the blades.......same fix

Mar 18, 2009 | Andis Styliner SLII Hair Trimmer

3 Answers

Andis Outliner II Trimmers


look if the trimmer is pulling hair, its not lack of oil
its maybe the speed of the trimmer needs to be faster.
its the the plastic flat head skrew on the side.check if the blades separate easiley if theyt do sometimes that makes the trimmer pull hair to.there might be a little plate on the inside of the trimmer and its not holding the blades tight.adjust that not to tight though then the trimmer wont cut

Dec 06, 2007 | Andis Outliner II Hair Trimmer

Not finding what you are looking for?
Andis Styliner SLII Hair Trimmer Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Andis Health & Beauty Experts

Bruce Showalter

Level 2 Expert

133 Answers

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1639 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Are you an Andis Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...