Question about Hotpoint RFA60 Bottom Freezer Refrigerator
Take food out of freezer
Posted on Jul 29, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
depending on where the gaps are your hinges are warped. losen up the hings bolts and adjust hinge then hold in place and retighten bolts
Posted on Jul 02, 2009
You can peel back the seal looking behind it and there should be screws all the way around it.
Or you problem could be caused by-
The lower hinge on each door
may have a door closing cam. It raises the door up ¼ inch when opening and this
assist in closing the door. If it’s wore out and doesn’t work the door may not
seal and the gasket can be damaged. Watch the operation of the door to see if
it rises up when opened.
Posted on Aug 09, 2009
In short no as long as you get the correct seal type from a spares shop, or Whirlpool. Just make sure that it is straight and there are NO gaps or splits in it when you refit it. Usually these will come pre cut to size for the particular model of FF but you can also buy seal strip on a reel from many spares shops. Also when you have removed the old seal make sure that you use a degreasing cleaner to clean around where the old seal was located and make sure the area is dry before fitting the new one.
Posted on Aug 29, 2009
SOURCE: Have replaced seal on freezer
Sometimes the gaskets are a little bigger than the orginal. what to do is use duck tape or something to keep the door closed for 24 hours and this will help put the new gasket in the right position. hope this helps. wally
Posted on Aug 16, 2011
Tips for a great answer:
Aug 20, 2016 | Refrigerators
Nov 03, 2017 | Frigidaire Refrigerators
Sep 24, 2010 | Whirlpool 19.6 cu. ft. Upright Freezer...
Feb 18, 2010 | Refrigerators
Sep 14, 2009 | Bosch Freezers
Jul 06, 2009 | Freezers
Dec 08, 2008 | Frigidaire 14.1 cu. ft. Upright Freezer...
Aug 27, 2008 | Freezers
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: