Question about Maytag Neptune FAV6800AW Top Load Washer
As soon as i lifted the top of the Maytagg 2000 to see if i could remove some of the degree in the cot & cold pipe i noticed that a switch/sensor was hanging. My "NF" code was because of a sensor/switch that fell off the wall of the washing machine. when it fell it must have got lodge between the tub and the wall and cut a wire. I bypassed the cut wire by running it directly to the switch/sensor but keep in mind that it was sunday and we haven't don laundry for a week and come monday i will seek the propped part for a permeant fix """DO NOT ATEMPT THIS IF YOU HAVE NO CLUE WHAT YOU ARE DOING. in conclusion some times look for the obvious.
Posted on Jan 13, 2013
Thanks for using FixYa. Error NF means No Fill. The washer has tried to fill but was unsuccessful. NF indicates No Flow. There is something that is interrupting the inbound flow of water to the washer, either hot or cold. Sometimes this happens when water service in the area is interrupted, creating an air pocket that causing the water valve not to sense water.
Try running the diagnostic test by—
Posted on Sep 05, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 13, 2018 | Washing Machines
Last Update date : 2015.06.17
The 4E or NF error code indicates a water inlet problem or the machine cannot feed itself with water. Make sure the source water tap is turned on and check the water pressure.
To troubleshoot this error further, follow these steps:
Note: The steps below generally apply to all types of Washing Machine (Top Load, Front Load, Washer and Dryer Combo)
Step 1: Turn the machine OFF.
Step 2: Turn the water tap OFF.
Step 3: Remove the water hose from the tap and dispense the water into a sink.
Step 4: Remove the entire hose.
a. Check for Kinks.
b. Check for Clogs.
Step 5: Check if water supply is good.
Step 6: Check, remove, and then clean the first mesh filter (Brush under running water).
Step 7: Check and clean the second mesh filter.
Step 8: Test the unit by turning it on and by performing a normal wash cycle.
Step 9: If the issue persists, unit may require service. Inquire about the Warranty and Service Booking procedures for the unit.
May 06, 2016 | Washing Machines
Dec 15, 2015 | Frigidaire Affinity ATF7000E Front Load...
Sep 19, 2012 | Washing Machines
Hello & Welcome to FixYa
NF error in your Maytag is
displayed due to no fill condition, when the washer tries to fill but is unable
to nf is displayed. Please check the water inlet valve for any clogs and
obstructions, you can also clean the inlet to solve the issue. Please get back to me if you have any
Oct 02, 2011 | Maytag Neptune MAH5500B Front Load Washer
Hello & Welcome to
NF error in your washer is displayed due to no fill condition,
when the washer tries to fill but is unable to nf is displayed. Please check
the water inlet valve for any clogs and obstructions, you can also clean the
inlet to solve the issue. Please
get back to me if you have any other questions.
Mar 06, 2011 | Samsung WF337AA Front Load Washer
Dec 02, 2010 | Kenmore Elite 45986 Front Load Washer
689 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: