Question about Texas Instruments TI-83 Plus Calculator
You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.
Posted on Sep 19, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Your stat plots are on, and may not be filled out/ correctly filled out.
go to [Y=] and go up to the stat plots ([Plot 1], [Plot 2], [Plot 3] ) and turn off the ones that are "ON" ( highlighed black w/ white text.) and press [ENTER] on the ones that are on and the problem is no more.
Posted on May 14, 2009
The solution for the problem is simple. When you use the calculator to create graphs, it is configured to accommodate the specificities of the problem. However that configuration remains set after you terminate the problem. So when you try to use the calculator to do other problems it uses the stored configuration parameters, which may be incompatible with the new problem.
In particular, list of paired-variables must have the same dimensions: There must be the same number of elements in each list.
To make a long story short, you should make it a habit to reset the Ram everytime you want to do a new problem. If for reasons of you own you do not want to reset the Ram, you can prevent this type of errors from occurring. This is how you do it.
Hope it answers your questions.
Thank You for usibg FixYa.
Posted on Nov 24, 2009
SOURCE: whenever i try the graph
You have to turn all statistical plots OFF before you draw function graphs. Press [2nd][Y=] to open the statistical plot configuration screen. Press [4:PlotsOFF] and then [ENTER]. When calculator answers DONE you are ready to draw function plots.
Posted on Sep 10, 2010
SOURCE: I entered and calculated data
If you have a frequency list it must be entered in a statistical list, L2, L3, ...or L6.
If the frequency of all elements is 1 you do not need to enter the frequency in a list. When you go to draw the box plot, the frequency will be set to 1.
Posted on Sep 11, 2010
Tips for a great answer:
Nov 01, 2013 | Texas Instruments TI-83 Plus Calculator
Jan 23, 2011 | Texas Instruments TI-83 Plus Calculator
Jan 19, 2011 | Texas Instruments TI-84 Plus Silver...
Jan 14, 2011 | Texas Instruments TI-84 Plus Calculator
Nov 16, 2010 | Texas Instruments TI-83 Plus Calculator
Oct 28, 2010 | Texas Instruments TI-84 Plus Silver...
May 12, 2010 | Texas Instruments TI-84 Plus Calculator
May 12, 2009 | Texas Instruments TI-83 Plus Silver...
180 people viewed this question
Usually answered in minutes!