Question about LaCie Big Disk External USB 2.0 1TB Hard Drive
font-family: arial, verdana, sans-serif;
background: transparent url(../wysiwyg_rte/misspell.gif) repeat-x scroll center bottom;
Okay , so there are some steps to figure out what is wrong with your external.
Firstly , if your computer makes a sound when you plug in your external , go to Start-Control Panel-Administrative Tools-Computer Management-Disk Management , and see if your external drive is listed here with your local drives. If it is listed , right click on the drive and change the drive letter to make it appear in "my computer".
If your drive does not make a connection sound when connecting to your computer and also does not show up , please follow the next step.
Remove the hard drive from the casing if possible and install it in your computer case or another external case.If the drive works , the problem is with the casing and you can ignore the drive.
Now , if the problem is with the casing , there are still 3 possibilities.
The second component you want to test is the USB cable. If you have a printer , swop out the cables and see if your printer functions normally. Most externals use the same connector so you should be able to test it in this manner. If the cable works go on to the last step. If the cable is defective , replace it with a new one which you can find for about $10 at most electronics and chain stores.
The last component to test is the circuit board. This is a bit of a grey zone as you probably won't be able to spot the blown component unless it failed really badly. With the casing already opened , locate the external's circuit board and check to see if you have any blackened components or fluids leaking from some components. If all the other components of the external worked perfectly , then this is the faulty part. It is not really economical to replace the circuit as most of the time it is out of production by the time you need to replace it and it still costs a lot even if it is available so if your drive is working perfectly when connected via sata or IDE on your computer , the best is to buy a new casing and place your old drive in the new casing.
A casing costs about $50 and you could get it at most tech shops and big chain stores like Best Buy.
I hope this solves your problem and please reply if you need more help.
Posted on Sep 27, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 03, 2015 | Seagate FreeAgent GoFlex Desk 1.5 TB USB...
Jul 18, 2011 | Seagate FreeAgent GoFlex Desk 2 TB USB 2.0...
Jul 06, 2011 | SimpleTech 250GB USB2.0 7200 RPM External...
Feb 08, 2011 | Western Digital My Book Essential Edition...
Aug 30, 2010 | Western Digital My Book Essential 1TB...
Jun 17, 2010 | Seagate FreeAgent Go 250 GB USB 2.0 Hard...
Jun 16, 2010 | Seagate FreeAgent Pro - 500GB, 7200 RPM,...
Mar 03, 2010 | Iomega 1TB Desktop USB 2.0 Hard Drive
May 19, 2008 | Vantec NexStar-3 External 3.5inch...
Mar 04, 2017 | LaCie Big Disk External USB 2.0 1TB Hard...
Feb 04, 2013 | LaCie Big Disk External USB 2.0 1TB Hard...
Jun 27, 2011 | LaCie Big Disk External USB 2.0 1TB Hard...
Mar 01, 2018 | LaCie Big Disk External USB 2.0 1TB Hard...
205 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: