Question about Champion International Champion Power Equipment 46515 3500 Watt 196cc OHV 4cycle Gas Powered Rv

1 Answer

The coil rope broke I would like to know how i can repair it. Generator 5500 watt champion.

Posted by on

Ad

1 Answer

If I understand correctly, you have a pull-start generator.

The rope to the pull-start broke.

This happened to us out on the job one day.

Our equipment might be different than yours. Our pull-start assembly is held with 4 bolts. Simply remover those bolts and lift off the cover ... carefully. The rope is attached to something I will call a pulley. The rope wraps around the pulley several times.

Do not lift out the pulley that the rope attaches to >> or the spring that re-winds the rope will come un-sprung (at least it did on our machine). If the spring comes unwound, then you got another job, and have to put the spring back also. Your machine might be different.

Keep pulley in place. Remove rope. Get another rope with same diameter and length and put it in.

Posted on Oct 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should be the voltage at the brushes of a running champion 9k watt generator.


might find something here
https://www.google.com/search?q=champion+generator+troubleshooting&rlz=1C1GGRV_enUS751US753&oq=champion+generator+troubleshooting&aqs=chrome..69i57j0l3.10135j1j8&sourceid=chrome&ie=UTF-8

May 24, 2018 | Cars & Trucks

1 Answer

Starter cord replacement of EF 1000IS Generator


Mentioned here and a general video

Search Results

Recoil Starter Assembly - Yamaha EF1000iS Service Manual [Page 39]

https://www.manualslib.com > ... > Inverter > EF1000iS > Service manual Yamaha EF1000iS Manual Online: Recoil Starter Assembly. ... RECOIL STARTER ASSEMBLY. 1. Install: 1. 2. Install: NOTE: Hook the edge of spiral spring to the ... Inverter Yamaha EF6300iSDE - 5500 Watt Inverter Generator Owner's Manual.

How To Replace Pull Start Cord on Honda eu2000i Generator ...

? 7:07
https://www.youtube.com/watch?v=5WAuEW8decY May 27, 2016 - Uploaded by Tula's Endless Summer
http://tulasendlesssummer.com Here is a short video on how to replace the pull cord on a Honda 2000 watt ...

Yamaha EF1000iS Service Manual Recoil Starter Assembly

May 20, 2018 | Garden

1 Answer

5500 watt generator will not run my 2hp air compressor


5500 watt generator will meet the 1491.4 watt requirement of the 2 hp compressor motor
given that 5500 watts generator is rated continuously at around 4500 watts and will handle spikes to the 5500 watts when electrical components start there should be plenty left
consider the possibility or a motor below full capacity, carby problem ( jets blocked , water, blocked air filter not getting full throttle from the governor lever, worn rings, type of fuel in use --E mix)

Nov 18, 2015 | Electrical Supplies

1 Answer

I have a Briggs & Stratton 5500 watts generator that I hardly pull the rope for start, begins stuck then its loosen again and again gets too hard to pull, any suggestions please help


If the unit is older it could have heavy carbon in the cylinder heads, it could be a ring sticking and binding, do a compression test. Compression is high or mechanical binding.

Feb 24, 2015 | Briggs Stratton Portable Generator 305cc...

2 Answers

Honeywell 337cc generator 5500 will not start


Try squirting starter fluid and see if the engine tries to start. If it does, then focus on the carburetor. If you're sure the source of the trouble is ignition related, check for good continuity on the coil wires to the other end. If it's a stator operated coil, check all connections from the coil to the stator and make sure you have good clean connections and ground.

Feb 02, 2015 | Honeywell Generator 337cc Engine 5500...

1 Answer

We have a Valsi 5500 watt generator that isn't putting enough voltage out to run everything in out small travel trailer. It runs the lights but doesnt push out enough voltage to carry the A/C, microwave,...


How long have you had this generator?
Has the generator worked on all of these loads before?
Model 5500 is a 5500 Watt generator which could easily be 5500 watts (Peak) and not continuous.

Your AC is an inductive load.
Your lights are resistive loads

An inductive load can cause issues when starting due to an increased current demand at start up that some generators cringe under. Do the lights flicker or are they stable? I'd say your diodes on your stator are working if you have light stability but you haven't provided nearly enough information for a detailed solution.

I'm sure you have enough voltage but you aren't getting enough current to run specific loads. How many watts is your AC? How many watts for your microwave? Both of these units demand a great deal of energy to run and when you place too much demand on your generator, it will choke it out and eventually, will cause damage to the generator. You may consider getting a beefier generator with a greater amount of wattage output.


Seeing these specs online and noting what you are trying to run, you have an undersized generator and need to get one that can produce a greater amount of running wattage (as well as peak wattage).

Apr 12, 2011 | Watts Onan Portable Generator - 4000 ,...

1 Answer

The start pull handle is out , how to fix it


The pull start cover rope & spring will need to be removed. it may be bolted on or riveted on if rivets drill them out when off you'll see the problem spring dislodged or broken rope broke repair & reassemble. watch as spring is tricky to wind up..

Apr 08, 2011 | Champion 2.4 HP Gasoline Generator

2 Answers

PF 2500 watt generator... Need plug and oil


30wt oil, probably a Champion RN4C plug. Could give link to a manual if part / model number of generator was provided.

May 17, 2010 | Coleman Powermate Proforce 6,000 Watt 12...

1 Answer

The starter rope will not go back in?


the rewind spring end either broke or came out of the rope spool,remove rope start assembly,if you have never done this before, I suggest you have someone who has show you,the spring can get away from you

Jan 31, 2010 | Briggs & Stratton Power Products 5,550...

1 Answer

When replacing the coil packs on an Onan 7000 generator, does the entire generator have to come out of the motorhome in order to get to them?


do you have an acess top to it from inside trailer? and you might have a hard time if you dro pa bolt or something. look at where they are and go from there. ya its a pain pulling them but if you have too... how do you know your coil packs are bad?

Mar 26, 2009 | Watts Onan Portable Generator - 4000 ,...

Not finding what you are looking for?
Champion International Champion Power Equipment 46515 3500 Watt 196cc OHV 4cycle Gas Powered Rv Logo

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Champion International Electrical Supplies Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18087 Answers

Are you a Champion International Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...