Question about Belkin Wireless Play Router (F7D4302)

2 Answers

Help me ! I lost my Belkin Wireless Play Router (F7D4302) SSID and passphrase that comes on a card with the router before i set up my router ?? so i can't set up and use my router please if you could give the defult SSID and Password thanks

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Check on the underside of the unit, there may be a sticker with your SSID on it. If you need to you can also reset the password back to the factory default by holding down the reset button. You can also download the instruction manual from here:

http://www.belkin.com/IWCatProductPage.process?Product_Id=509868

Would you kindly rate my answer please if this has helped resolve the problem - thanks :)

Posted on Oct 21, 2010

Testimonial: "thanks alot to remind to see underside becouase i foundh what i am looking for .. thanks again ^_^"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 707 Answers

Belkin F5D6130 SNMP (none) MiniAP Admin Wireless Acess Point IEEE802.11b
Belkin F5D7150 FB Multi n/a admin Admin

BELKIN F5D6130 SNMP (none) MiniAP
BELKIN F5D7150 Rev. FB MULTI n/a admin
BELKIN F5D8233-4 HTTP (blank) (blank)

here are some factory backdoor passwords and usernames hope they help

Posted on Oct 21, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 358 Answers

SOURCE: Help me ! I lost

Hi this is not a problem any more for you

  1. the password and SSID default is not important any more
  2. lets we make it manually
  3. open one explore and erase the address bar htt://xxxxx
  4. need to be blank the address bar and type (router)nad press enter
  5. belkin setup page will be open and you can make all configuration needed for you new SSID and Password
  6. left side under the Logo Belkin you will see a the menu for setup
  7. go to channel and SSID click and if the router ask you for some password just click Submit and the next page will be open
  8. for default SSID is Belkin XXXX now erase all and type your new SSID one name only no numbers and click in to apply changes
  9. after that go to left side again and next to channel and SSID line there is a Security click again and if ask you a password remember just click on to submit(no password needed)
  10. Ok now you are in security mode click the security mode and change to 64bitwep or WEP only after that will appear one area were you need to input your new password 10 numbers and click apply changes.
  11. Next disable wife protect setup and firewall in to your router .
Ok your new SSID and Password is setting just look for your wireless signal and be connected

any problems just ask me for a remote your PC.

Good Luck don't forget to rating me kk thanks

Posted on Oct 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i setup the belkin f7d4302 as a wireless bridge


belkin does not support this. The only way you can do it is by running a cable to the router to extend your wireless signal around the house. I did a similar setup with a powerline network adapter if running a cat5 cable is not a option. just make sure you change the main ip address for the 2nd router to like 192.168.2.2 and disable dhcp since the main router will handle dhcp. also make sure the wireless settings are the same and channel is different if 1st router is channel 1 then use channel 6 or 11 for the 2nd router.

Feb 26, 2012 | Belkin Wireless Play Router (F7D4302)

1 Answer

I go to connect and now a box appears Security key or passphrase? I have two lap tops no problem but I just got another one this appears


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

Jul 16, 2011 | Belkin Computers & Internet

1 Answer

It will allow some computers to connect but not others WHY?


Encryption is probably enabled in the router's wireless settings. The computersthat cannot connect to the router most like has not had their wireless cards configured with the router's encryption settings.

Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

Jun 17, 2011 | Belkin N Wireless Modem-Router F5D8633au4A

1 Answer

HOW TO CONNECT MY NEW LAPTOP INSPIRON 15R TO BELKIN ROUTER MODEL F507230-4 VERSION 1112 WHAT IS THE PRCOCEDURE I DO NOT HAVE MANUALS


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the laptops and orcomputers with these router's wireless settings. Then the laptops and desktopcomputers can communicate with your wireless router.

May 01, 2011 | Belkin (F5D7230-4) Router (587009)

1 Answer

I have a belkin wireless router I have one laptop connected to it now I want to connect another laptop to it but I forgot the password how can I find it?


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, it needs the router'swireless settings configured ie SSID, WPA or WPA2 encryption key and also thewireless cards in all the laptops and or computers needs to be configured withthese router's wireless settings. Then the laptops and desktop computers cancommunicate with your wireless router.

Apr 01, 2011 | Belkin Computers & Internet

1 Answer

Can't setup two wireless computers


The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, it needs the router'swireless settings configured ie SSID, WPA or WPA2 encryption key and also thewireless cards in all the laptops and or computers needs to be configured withthese router's wireless settings. Then the laptops and desktop computers cancommunicate with your wireless router.

Mar 12, 2011 | Belkin F5D8236-4 Router

1 Answer

Help me ! I lost my Belkin Wireless Play Router (F7D4302) SSID and passphrase that comes on a card with the router before i set up my router ?? so i can't set up and use my router please if you...


Hi this is not a problem any more for you

  1. the password and SSID default is not important any more
  2. lets we make it manually
  3. open one explore and erase the address bar htt://xxxxx
  4. need to be blank the address bar and type (router)nad press enter
  5. belkin setup page will be open and you can make all configuration needed for you new SSID and Password
  6. left side under the Logo Belkin you will see a the menu for setup
  7. go to channel and SSID click and if the router ask you for some password just click Submit and the next page will be open
  8. for default SSID is Belkin XXXX now erase all and type your new SSID one name only no numbers and click in to apply changes
  9. after that go to left side again and next to channel and SSID line there is a Security click again and if ask you a password remember just click on to submit(no password needed)
  10. Ok now you are in security mode click the security mode and change to 64bitwep or WEP only after that will appear one area were you need to input your new password 10 numbers and click apply changes.
  11. Next disable wife protect setup and firewall in to your router .
Ok your new SSID and Password is setting just look for your wireless signal and be connected

any problems just ask me for a remote your PC.

Good Luck don't forget to rating me kk thanks

Oct 21, 2010 | Belkin Wireless Play Router (F7D4302)

1 Answer

Is there a eay to password protect the Belkin Play Router so shen you get ready to use it you have to put in a password and keep unauthorized users off you network?


wau amigo creo que estamos hablando en Espanol ..

Ok si es asi seria mejor para mi hey hey.

ok lets solution your problem

ok change security mode is easy in router belkin
just ping 192.168.2.1 open setup page and get inside your router

click in Security and change the password for any you like apply changes and ready you have a new password .

other choice disable SSID share, so dont body will be see your Wireless SSID.
any question ask me for a remote you PC

Cualquier pregunta solo escriveme y te ayudare amigo

Don't forget to rating this .. thanks

Sep 11, 2010 | Belkin Wireless Play Router (F7D4302)

2 Answers

I have loaded my PC with the SW for my F7D4302 Belkin Wireless Play Router and when I go in the other room to access my wireless laptop - the system asks for my network key and confirm key.


Hey hi dude. The router which you have installed recently in your system is password protected i guess. While installing the router software itself you will be asked to give some password in order to protect the router from 3rd party interference and to make it personalised for you. So just recollect the password which you have given that time and give the password to connect it. You can able to connect it. The problem is not with the distance between the router and your laptop.

Aug 02, 2010 | Belkin Wireless Play Router (F7D4302)

1 Answer

I forgot my passphrase. How do I find it?


The passphrase is a method of setting up the encryption setting in the wireless router. Go into the router configuration and then into the wireless settings.

To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.

Nov 15, 2009 | Belkin Computers & Internet

Not finding what you are looking for?
Belkin Wireless Play Router (F7D4302) Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...