Question about HP Laserjet M2727nf Multifunction Printer

1 Answer

How to reset hp 2727 nf - HP Laserjet M2727nf Multifunction Printer

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 425 Answers

To do an NVRAM reset follow these steps:

1. Turn off the printer.
2. Hold down the Cancel button and the right arrow button and while holding them turn on the power.
3. Wait for the message Permanent storage unit. Then release the buttons.

Wait for about 2 min. When the printer is back at the ready screen it has been reset.

it will reset EVERYTHING, including your serial number and everything else that matters.

Thanks for using fixya...

Posted on Oct 26, 2010

  • okeoma onyedikachi
    okeoma onyedikachi Oct 26, 2010

    problem, I called HP and they've extended the warranty because of the
    issues they've had with the formatter boards. They let me bring it in
    locally and have it repaired for free, or you can buy a refurb from them
    for 45.00, good deal!



2 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 123 Answers

SOURCE: how tdo i print out number of copies my hp laser

You go to the Main Menu on the physical printer, then you look for reports , hit enter and finally look for "usage page"
This will show the number of copies you have printer with the unit

Posted on Jul 14, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Impresora multifuncional HP M 2727 MFP me sale error 79 donde esta el error

CORRA ESTE PROGRAMA DE DIAGNOSTICO HP- Try using the HP Print Diagnostic Utility in Windows.

If you need more help post back!
Thumbs and testimonial are welcome!

Aug 04, 2011 | HP Office Equipment & Supplies

1 Answer

I have just replaced my toner on my HP M2727 nf printer, how do I reset the page count only?

There is no resettable page count on this printer. If you are referring to the counter for the toner level, that is reset by a chip on the cartridge. That chip only works once and if you are using a refilled cartrige that chip should have been replaced. If you refilled it yourself you will need to check on Ebay to find a replacement chip. If you bought a refilled from someone else, take it back and get them to change it. If you bought an OEM HP cartridge and it does not reset the count then call HP as the guarantee their cartridges.

Jun 27, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Hp m 2727 mfp says replace cartridge but it is new

If it's a new cartridge, return it.
It is probably defective.
HP guarantees their cartridges.

Jun 09, 2011 | HP M2727NF Laserjet Printer

1 Answer

How tdo i print out number of copies my hp laser jet nf 2727 has done

You go to the Main Menu on the physical printer, then you look for reports , hit enter and finally look for "usage page"
This will show the number of copies you have printer with the unit

Apr 16, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

MFP 2727 is powered and hums when turned on but nothing shows in display panel. Machine goes silent after 20 seconds. Is there a cold reset procedure or other fix

This is due to a formatter failure.

Try an nvram
Try doing a hard or reset or nvram:
1. Turn the printer off
2. Hold down the right arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

if this does not work contact hp, if within 2 years from the purchase date ask for a case number to have the printer serviced under a service note.


Mar 10, 2010 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Laserjet 2727

Why would you offer a smart *** comment to a potentially legitimate question? I have the same issue after replaceing the formatter board, the printer is reporting SN12345678 as the serial number.

Feb 08, 2010 | HP Office Equipment & Supplies

2 Answers

Done a windows 7 install on amilo 2727 and now wireless wont come on

I would first of all go here:

and check you have the correct wirless drivers installed.

Nov 21, 2009 | HP Pavilion dv6000z Notebook

Not finding what you are looking for?
HP Laserjet M2727nf Multifunction Printer Logo

4,760 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides