Question about Xerox 8830 Copier

2 Answers

I uploaded the wrong firmware to my xerox 8830. I have a CNG controller and i sent the N5T to it. now it hangs up. how do I get the old firmware out i tried to send the right firmware and it will not take it.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 51 Answers

Follow the controller service mannual in the disk recovery section it a long process to explian here

Posted on Dec 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi,
i need controller service mannual.
egyprint_2014@hotmail.com

Posted on Nov 21, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox 6400 hangs up at boot screen


I hate to say this, but chances are either the software is corrupt or one of the two drives has failed. Your best bet is to call for a xerox authorized technician.

If by chance you are one, download the firmware from xerox and perform the altboot/forced upgrade solution in the manual. Even if it fails it will generally tell you which drive is bad. You can tell by when it fails on reload, copy control or network control. You'll need a new 160gb sata drive that is comparable with the machine, or order a firmware matching set of drives from xerox.

Feb 10, 2014 | Xerox 6400/XF Color Laser Mfp Workcentre...

1 Answer

8830 Idle Message


Try to reinstall the driver. You can get the latest from the link below:
http://www.nodevice.com/driver/xerox-8830-printer/get126620.html

Sep 23, 2013 | Xerox Office Equipment & Supplies

2 Answers

Line appears on copies from top to bottom of the sheet, Approx 7 7/8 in. It happen both off the glass and when ripping a job to machine


With lines showing up with both coping & printing, you are most likely need a general cleaning and if that will not work, odds are you are going to need a new OPC drum & drum cleaning blade and a new developer change..... Good Luck

Nov 09, 2012 | Xerox 8830 AccXES N5T Wide Format Digital...

1 Answer

Drivers for copier and scanner xerox 8830


Hi
You can download 8830 drivers from http://www.xerox.com/digital-printing/large-format-printers/enus.html
you need to check the type of controller that is fitted to printer.
Look on the back at box where connections are terminated.
label should have (F5Y or CNG - N5T - HFT and others select which is fitted and operating system, other support documents are also found here.

Jan 24, 2011 | Xerox 8830 Copier

1 Answer

Copier only copies half a page and then the bottom half on the next page consecutively


switch off the machine then switch on after five minutes if problem exists replace its firmwares

Aug 31, 2010 | Xerox 8830 Copier

1 Answer

Manual Required


Hi Steve,

There are many different Xerox 8830, depending on the serial number instructions are also different.


Click here, select the one with first 3 letters of your serial number and download documentation (click on documentation on the right below selected model).


For example blow serial number CNG support links:

Support | Drivers & Downloads | Documentation


Apr 09, 2009 | Xerox 8830 Copier

2 Answers

X8830


check to see if the fuser is turning on and heating up.

Feb 22, 2008 | Xerox 8830 Copier

1 Answer

Xerox 8830 - 2 Drawers / Trays non-operational


I would suggest to have the proper service rep work on it. albeit pricey if you want it to work correctly have it professionally serviced.
Or say, Dearly beloved, we gather here today LOL.

Dec 18, 2007 | Xerox 8830 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...