Question about HP LaserJet P1505n Printer

1 Answer

I have of got problem with HP laserjet P1505n printer, which is when someone did not print for a about 10 minutes, and then try to print something, always it doesnt print until user manually push the power button of the printer. next is if someone send a print job to the printer when there are no paper on the tray, the status of the printer says "out of paper" on the PC and even after adding papers to the tray, neither Printer nor PC will detect it. the print Job will hang and nobody else in the network also will not be able to print. the only way of bring the device working is restart the print spooler service in the PC and delete the print job. I am fed-up with this issue and hope some would help me to come out of this pain. thanks in advance.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 43 Answers

You should be able to reset the printer

Posted on May 31, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MUKHTAR
  • 2022 Answers

SOURCE: printer won't print

switch of the printer first remove the usb cable from the printer and uninstall the printer driver nad remove printer from device manager also. to go to the device manager do these steps first right click on my computer and then go to properties and the click on hardware tab and then click on device manager and go to universal serial bus controllers just click on + tab it will expand and it will show the list of connected hardware select usb printing support and right click on and uninstall then restart you system. after coplete boot run the driver software and connect the usb cable when it will prompt you and switch on the printer. it will install your printer

Posted on Sep 22, 2007

Nikhil Gedam
  • 87 Answers

SOURCE: hp laserjet 4250

Hello,
This happens when the printer is printing duplex job. i.e. trying to print the other side of the page.
However check the functionality of the printer by performing Paper path test.
This would help us to know whether the printer as a stand alone ... is fine or not.

From the control panel of the printer, scroll to Diagnostic > paper path test.
Select the following in sequence.
Source: All trays
Copies: 10
Duplex: ON
Print Test Page

Check if you get the same error.
If yes, upgrade teh firmware of the printer.

Let me know the end result. We still have more depending on the above test.

- Nikhil


Posted on Nov 04, 2008

leroyal
  • 2120 Answers

SOURCE: HP Laserjet 4050 hangs on processing job

Unplug printer cable.
turn off
turn back on and wait for READY
turn off
connect printer cable
turn on

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: Cannot print on shared printer

I had the same problem with HP 1018 printer, when I had two computers connected to a domain and had Windows XP SP3 on them and when I shared the printer on one of them - I could only print from the network if the user belonged to the Local Administrators group on the host/server computer. Once the network user is removed from Administrators - the print jobs are stuck in print queue. I used the "HP LaserJet Host Based Print Driver Package" that is on HP web site for HP laserjet 1018 printer.
Then I tried to use a different driver for that printer and was successful with driver for HP LaserJet 1020. After forcing that printer to use the 1020 drivers, the regular users were able to print to that printer.

Posted on Jan 28, 2009

  • 8 Answers

SOURCE: hp 2420 prints a ''job storage status page'' after each print job

If you have your software driver or print job set to save your print jobs to the printer and your printer does not support this, you will get that error and status page. Here is what the User's manual says about print job storage:
"The printer supports two distinct job-storage features that you can use to initiate printing from the printer control panel after the print job is sent from the computer:
● Proof and hold jobs
● Private jobs
Make sure that you identify your jobs in the printer driver before printing. Using default names might override previous jobs that have the same default name or cause the job to be deleted.

The job-storage features require 48 MB of RAM. For printer models that have less than 48 MB of RAM, you can add memory so that they can support the features."

Posted on Apr 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer will not print queque HP Laser Jet P1505


first remove the power and usb pin from the printer wait for few minutes then connect them back into the socket then click printer icon in the task bar and open it and remove all the contents then again remove the power and the usb of the printer and restart your computer then connect the power plug and the usb into the printer then click start settings printer and make your printer default then right click your default printer and select properties in the printer properties click print a test page

Apr 01, 2011 | HP LaserJet P1505n Printer

3 Answers

I am using Windows 7 but I cannot install my printer as I need to have drivers first


HP LaserJet P1505n is compatible with Windows 7and you can download the drivers from HP Official Support.
Visit the above link. Select the Operating System (Windows 7) (32-bit OR 64-bit) and download the drivers fro FREE

CreativeTECH

Jan 24, 2011 | HP LaserJet P1505n Printer

1 Answer

My printer is reporting the door open. i have tried all i can to resolve it. kindly help


remove the toner/cartridge and then unplug the power from the printer.. after about 10 seconds, replug the printer and insert the toner .. Now, ensure that the door is properly closed ..

Sep 03, 2010 | HP LaserJet P1505n Printer

1 Answer

One default vertical line is printing in the right side of the printable area on the printed paper


i have hp printer laser 1505, it can print out and i set the paper on portrait. but the output of printing out is the characters are on landscape style. So what should i do...plz help me if somebody can solve it

Sep 03, 2010 | HP LaserJet P1505n Printer

1 Answer

Will not print periodically. Cannot clear print


Try downloading the latest driver from HP: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3435671&lang=en&
Often times the drivers on the CD are already out of date.
Hope this helps! If so, please give a rating!

Mar 09, 2010 | HP LaserJet P1505n Printer

1 Answer

Self test is not comming


make sure the toner is not empty. try with other toner and then go for print.

Feb 02, 2010 | HP LaserJet P1505n Printer

1 Answer

HP P1505 LaserJet won't print Acrobat files


I would update to the latest adobe acrobat reader and see if that works.

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_7148ad2a373711a3

Jul 30, 2009 | HP LaserJet P1505n Printer

Not finding what you are looking for?
HP LaserJet P1505n Printer Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...